Gigabyte T1028X User Manual - Page 20
Installing T1028 Device Drivers, 16 Touch Screen Calibration
View all Gigabyte T1028X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1.15 Installing T1028 Device Drivers If your T1028 TouchNote Computer already has an operating system installed, it is best to install all necessary device drivers in order for the hardware to properly function. Before installing drivers, check with your vendors to see if they have already installed all the drivers with the operating system, if not, please follow the steps below: 1. You can find the Utility Driver CD like the one shown below: T1028 TouchNote USER'S MANUAL 1.16 Touch Screen Calibration The stylus pen together with the system touch-screen LCD display provides you a touch-screen operation by emulating the industry standard mouse left click. Below are the two conditions that you English need to calibrate your touch-screen. • The first time Windows is installed and boot up. The active cursor is shifted; not exactly the same position where the stylus pen tip is tapped. • Periodically when you find the active cursor is shifted away from the screen position where the stylus pen tip is tapped. 11 To calibrate the touch-screen, go into Desktop Manu => eGalax Touch =>Configure Utility=> Tool =>4 points Calibrate. In the Setting screen, select Calibrate. Then follow instruction to complete calibration. 2. Put the CD into the CD R-W or DVD-RW (optional) Drive. An Auto Run installation screen will appear.