Gigabyte Z590 AORUS ULTRA User Manual - Page 20
SATA3 0/1/2/3/4/5 SATA 6Gb/s Connectors, NOISE_SENSOR Noise Detection Header
View all Gigabyte Z590 AORUS ULTRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
10) NOISE_SENSOR (Noise Detection Header) This header can be used to connect a noise detection cable to detect the noise inside the case. Pin No. Definition 1 1 Noise Detection 2 GND Noise Detection Cable 1 For more information on the noise detection function, please visit the "Unique Features" webpage of GIGABYTE's website. Before connecting the cable to the header, make sure to remove the jumper cap; re-place the jumper cap if the header is not in use. 11) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. G.QBOFM SATA3 5 3 1 420 G.QBOFM G.QBPOinFMNo. 1 2 Definition GND TXP 7 1 3 TXN 7 1 4 GND 5 RXN 6 RXP 7 GND To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\ SATA And RST Configuration," for more information. - 20 -