Gigabyte Z590 AORUS ULTRA User Manual - Page 40

RST_SW MULTIKEY Functionality of the RST_SW Button, LEDs in Sleep, Hibernation, and Soft Off States

Get Gigabyte Z590 AORUS ULTRA PDF manuals and user guides View all Gigabyte Z590 AORUS ULTRA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

&& SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Intel RST Premium With Intel Optane System Acceleration Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) && SATA Port 0/1/2/3/4/5 DevSlp Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. ƒƒ Intel(R) Ethernet Controller This sub-menu provides information on LAN configuration and related configuration options. ƒƒ Miscellaneous && LEDs in System Power On State Allows you to enable or disable motherboard LED lighting when the system is on. Off Disables the selected lighting mode when the system is on. On Enables the selected lighting mode when the system is on. (Default) && LEDs in Sleep, Hibernation, and Soft Off States Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state. This item is configurable when LEDs in System Power On State is set to On. Off Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default) On Enables the selected lighting mode when the system enters S3/S4/S5 state. && RST_SW (MULTIKEY) (Functionality of the RST_SW Button) Set this button to HW Reset Use the button to reset your system. (Default) Set this button to Switch LED On/Off Use the button to turn on/off the motherboard LEDs. Set this button to Enter BIOS Setup Use the button to enter the BIOS Setup. Set this button to Boot on Safe Mode Use the button to boot the system in safe mode. && Onboard DB Port LED Allows you to enable or disable the LED lighting of the motherboard debug LEDs when the system is on. (Default: On) && Intel Platform Trust Technology (PTT) Enables or disables Intel® PTT Technology. (Default: Disabled) && 3DMark01 Enhancement Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled) (Note) This item is present only when you install a CPU that supports this feature. - 40 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
&
SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
±
Intel RST Premium With Intel Optane System Acceleration
Enables RAID for the SATA controller.
±
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
&
Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
&
SATA Port 0/1/2/3/4/5 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
&
Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
Configured as eSATA
Enables or disables support for external SATA devices.
±
Intel(R) Ethernet Controller
This sub-menu provides information on LAN configuration and related configuration options.
±
Miscellaneous
&
LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
±
Off
Disables the selected lighting mode when the system is on.
±
On
Enables the selected lighting mode when the system is on. (Default)
&
LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is configurable when
LEDs in System Power On State
is set to
On
.
±
Off
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
±
On
Enables the selected lighting mode when the system enters S3/S4/S5 state.
&
RST_SW (MULTIKEY) (Functionality of the RST_SW Button)
±
Set this button to HW Reset
Use the button to reset your system. (Default)
±
Set this button to Switch LED On/Off
Use the button to turn on/off the motherboard LEDs.
±
Set this button to Enter BIOS Setup
Use the button to enter the BIOS Setup.
±
Set this button to Boot on Safe Mode
Use the button to boot the system in safe mode.
&
Onboard DB Port LED
Allows you to enable or disable the LED lighting of the motherboard debug LEDs when the system is on.
(Default: On)
&
Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
&
3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
(Note)
This item is present only when you install a CPU that supports this feature.
- 40 -