HTC Touch Pro Alltel Alltel Touch Pro SMS Timestamp Hotfix - Page 20
Using the Strap Holder, 5 Starting Up - release
View all HTC Touch Pro Alltel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 Getting Started 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the strap holder hole on the back cover. Tip To pass through the strap holder easier, push the loop into the strap holder hole using a pointed object such as a needle or toothpick. 3. Attach the loop over the small t-shaped hook at the bottom of the device. 4. Secure the strap, lanyard or string accessory on the t-shaped hook as shown on the illustration on the right. 5. Replace the back cover. 1.5 Starting Up After installing and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press and hold the POWER button for a few seconds. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up regional settings, date and time, and password. For more information about these settings, see Chapter 13. After the Quick Start Wizard finishes, the device installs customization settings, then restarts. To turn off the power 1. Press and hold the POWER button for a few seconds. 2. Tap Yes when a message prompts you to choose whether or not to turn off the device completely. Switch to Sleep mode when not in use Press and immediately release the POWER button to turn off the display temporarily and switch your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power. Your device automatically goes into Sleep mode when you leave the device idle after a certain period of time. You will still be able to receive messages and calls while your device is in Sleep mode. Pressing the POWER button again, removing the stylus, or incoming calls/messages will wake up your device.