Haier ACD125R Owners Manual - Page 18
ÇÎÞÞ - shipping weight
View all Haier ACD125R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English 2PREPARE UNIT FOR INSTALLATION-2 1. Remove the screws which fasten the cabinet at both sides and at the back. 2. Slide the unit from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet. 3. Insert the Frame Guide into the bottom of the cabinet. Caution: Never expose plastic front or grille to extreme temperatures. Shipping Screws 3 ASSEMBLE CURTAINS/TOP RAIL Install top rail with three 13/32"screws. Slide left-hand curtain assembly into left end of top and bottom rails. Repeat for right-hand curtain assembly. Fasten curtain retainer strips to sides of outer case with eight 13/32" screws. 4 PREPARE WINDOW FOR Storm window installation If storm window frame does not allow adequate clearance below sill (1/2" INSTALLTION Inspect window track, sash, and sill for its ability to support the weight of air conditioner. required), remove storm window frame or create clearance by adding a wood strip (at least 1 1/2" wide) along entire width of sill. Fasten wood strip to sill with at least three countersunk Measure width between window moldings to ensure Instant Mount will fit window frame. Instant Mount wood screws (not supplied with kit). This provides a smooth surface for mounting air conditioner. models are designed for windows wide (the detail see page 15) 1 1/2" 1/2" Minimum Minimum Wood Instant Mount kit supplied with unit Str ip SILL is designed for mounting in most double-hung windows without I storm windows. For installation in N D window frame with storm window, O modify sill by adding wood strips (not O included) to inner and outer sills. This R O U T D O raises unit and eliminates O Storm Wi ndow R interference of storm window frame. Frame Mobile home window installation Add wood strip (at least 1 1/2" wide) along entire width of window sill. Thickness of wood strip should match height of front lip on window frame. Fasten wood strip to sill with a minimum of three countersunk wood screws (not supplied with kit). This provides a smooth surface for mounting air conditioner. Must be a minimum of 1/2" to clear bottom rail on unit 1 1/ 2" Minimum Wood Strip I N D O O R Window Frame O U T D O O R 16