Haier ACD125R Owners Manual - Page 20

English 6 INSTALL SASH BRACKET & SEAL GASKET Install sash bracket on top of indoor window sash with one wood screw 31/32" to prevent raising of window from the outside. Screw anchor directly into side of window frame. For hard wood or metal window frames, drill a pilot hole to start screw. Important:Be careful not to drill pilot hole too deep. Add a piece of tape to the drill bit as a depth gauge. Also stay clear of glass. Be careful not to damage the function of the window. Cut window seal gasket to width of window. Stuff window seal strip between outdoor window glass and top of indoor sash. This will stop air leakage which reduces efficiency. 7 INSTALL DRAIN TUBE The base pan may overflow due to high humidity. You must install the drain tube before using the unit. Adjust the direction of the drain tube to make it be in line with the hole in the rear of unit; Insert the drain tube into the hole and twist 90¡ª. To drain the excess water to indicated position, connect a drainpipe to the drain tube. When pressing the drain tube or drainpipe into place, apply force in the direction away from the fins to avoid injuring yourself. 8 RETURN CHASSIS TO OUTER CASE Find someone to help you replace chassis in outer case. Replace front panel, and grille. (Don't forget to install the attachment screws before replacing grille) Caution: For security purpose, reinstall screws at cabinet's sides. Important: Because window sash helps keep unit in window, make certain window sash contacts outer case before reinstalling chassis. 18