Haier BD-429GB User Manual - Page 17
English, Interior light, Resolving faults on your own, Attention, Calling the Customers Support
View all Haier BD-429GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English 11 Interior light (not provided in all models) A switch is built into appliances equipped with lighting. When the appliance is opened the light goes on automatically and switches off automatically when closed. The lamp is protected with a transparent cover. Strictly use 15 W max. replacement bulbs. To replace the light bulb,first remove the two shadefastening screws,then unscrew the troubled bulb by turning counterclock wise and replace with a new one of the same specification,and then remount the shade and fasten it up with the screws. 12 Resolving faults on your own High quality manufacturing processes and use of latest cooling and freezing technology will principally ensure trouble-free function of your appliance. If you suspect any fault, before contacting the approved after-sales service directly or via your dealer, make sure you have observed all instructions and advice in this user manual. Repairs by the approved after-sales service,centre/agent of faults that have occurred because of non-adherence to the information and advice given in this manual,will be charged to the customer and are not covered by your dealer's guarantee. Attention The compressor (M) (also known as motor) must not operate continuously. It is controlled by the thermostat which you set with the temperature control (FIG.4). It switches on automatically when the set temperature in the storage compartment exceeds and switches off automatically when the correct temperature is reached again. Noise can be heard from all compressor - cooling system when the compressor is switched on. This noise is produced when the motor in the compressor operates and also by refrigerant flowing in the cooling system circuit. These noises are normal and do not indicate any functional trouble. In unheated rooms and in cold weather condition condensation can build up on the outer walls of the appliance. This does not mean trouble and disappears when the weather becomes warmer. Calling the Customers Support Service Call the approved after-sales service only, if after analysis of possible trouble/fault factors you cannot find any cause for the defect or do not have the means to eliminate the trouble. Therefore first check under "Trouble shooting" Instruction for use 13 After-sales service Consult the enclosed guarantee card or the separately enclosed after-sales centres list, to see which company is responsible for servicing your appliance. If several after-sales centres are mentioned on the list, select the nearest one to you. If no after-sales service centres list is enclosed with your appliance, contact your dealer. 5