Haier BR500 User Manual - Page 13
Reversing The Door Swing
View all Haier BR500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Reversing The Door Swing Should you wish to reverse the direction in which the door opens (i.e.; from left to right or right to left) please follow the instructions detailed below. Never attempt to reverse the door opening by turning the door upside down. The existing / new hinges (depending on model) must always be moved to the opposite side of the door as shown above. The door should always remain the correct way up. x Slacken the retaining screws (1) on the appliance x Remove the appliance door x Lever off the cover caps (3) with a knife blade x Insert retaining screws (1) on the opposite side as shown above (screw in so as to secure but do not tighten) x Remove the door retaining screws (2) and relocate the hinges as shown above x Locate the door in the previously inserted screws and tighten x Insert cover caps (3) into the exposed holes where the hinges were previously located. Please note: When reversing the door of the appliance, the door seal on the side of the existing hinges may have become compressed over time. If this is the case, the seal may not make good contact with the cabinet when the door is closed. To revert the seal back to its original form, simply heat the seal with a hairdryer for no more than 1 minute. Always ensure the hairdryer is at least 20cm away from the door seal and allow the seal to cool for a minimum of 2 minutes before closing the door.