Haier BR500 User Manual - Page 3

Electrical Safety Information WARNING ! THIS APPLIANCE MUST BE EARTHED. IF THE MAINS LEAD OF THE APPLIANCE IS FITTED WITH A PLUG: FUSE REPLACEMENT If the mains lead of this appliance is fitted with a BS 1363A 13 amp fused plug, to change a fuse in this type of plug use a A.S.T.A. approved fuse to BS 1362 type and proceed as follow: 1. Remove the fuse cover (A) 2. Remove the fuse (B) 3. Fit replacement fuse into plug 4. Refit the fuse cover CONNECTION TO A REWIREABLE PLUG If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of in order to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. A suitable alternative plug should then be fitted to the cable. The wires in this mains lead are coloured in accordance with the following code: BLUE "NEUTRAL" (N) BROWN "LIVE" (L) YELLOW & GREEN "EARTH" (E) YELLOW & GREEN E BROWN N A B IMPORTANT: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted. Correct replacements are identified by the colour insert or the colour embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store. BLUE N Connected to a typical 13 amp plug CABLE CLAMP 1. The YELLOW & GREEN wire must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured green or yellow & green 2. The BLUE wire must be connected to the terminal which is marked with the letter N or coloured black 3. The BROWN wire must be connected to the terminal which is marked with the letter L or coloured red