Home » Haier Manuals » Mobile Phones » Haier C2000 » Manual Viewer

Haier C2000 User Manual

Haier C2000 Manual

View all Haier C2000 manuals

Add to My Manuals
Save this manual to your list of manuals

Haier C2000 manual content summary:

Haier C2000 | User Manual - Page 1
Welcome to use C2000 mobile phone from [Company] Technologies Co.., Ltd. [Company]® C2000 CDMA Mobile Phone User Manual
Haier C2000 | User Manual - Page 2
in any form without the prior written permission as [Company] Technologies Co.., Ltd. Statement The contents of this manual maybe different with the cell phone please according the cell phone. [Company] reserves the right to revise this document or withdraw it at any time without prior notice.
Haier C2000 | User Manual - Page 3
For further information, see the section of "Warnings and Precautions". Do not switch the phone on when Mobile Phone use is prohibited or when it may cause interference or danger. Do not place your phone and its accessories in containers with strong electromagnetic field. Obey all local laws. Always
Haier C2000 | User Manual - Page 4
not leave the battery connected to a charger for more than a week, since overcharging may shorten its lift. Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.
Haier C2000 | User Manual - Page 5
Getting to Know Your Phone 1 Packing list ...1 Basic specification ...1 Mobile phone appearance 2 2 Getting Started 8 Install and charge the phone 8 3 Basic Functions 9 Switching On/Off...9 Making phone call...9 Answering the call...11 Operations during a call 11 Keypad lock ...12 4 Text Entry
Haier C2000 | User Manual - Page 6
Change the input method 14 5 Contacts...15 Add new...15 List ...16 Search ...16 Groups ...17 Copy ...18 Speed dial...18 Delete ...19 Storage location ...19 Memory status ...19 My number...
Haier C2000 | User Manual - Page 7
...27 Voice mail ...27 7 Call history 28 Missed calls ...28 Received calls ...29 Dialled calls ...29 Delete ...29 Call timers...29 8 Settings...30 Display...30 Phone setting...31 Call setting...32 Firewall ...35 Security...38 iii
Haier C2000 | User Manual - Page 8
Phone info ...41 9 Profiles...42 10 Fun and Utilities 44 Alarm ...44 Scheduler ...44 Calculator ...45 Stopwatch ...46 11 Games ...47 Games ...47 12 TATA zone 49 13 My data...50 Ring ...50 14 SMS services 50 15 Care And Maintain 51 16 Safe Information 53 iv
Haier C2000 | User Manual - Page 9
800mAh Li-polymer battery) z Standby Time: about 115 hours z Talking Time: about 3 hours Notice: Standby time is the handset continuous working time without making phone calls. Standby time and talking time are both depending on mobile phone using situations, network situations and environments. 1
Haier C2000 | User Manual - Page 10
Mobile phone appearance Mobile phone view 2
Haier C2000 | User Manual - Page 11
⑴ Left soft key ⑵ Right soft key ⑶ 4-way navigation key ⑷ Send key ⑸ End (Power) key ⑹ Number keys ⑺ Charger connector ⑻ Headset hole 3
Haier C2000 | User Manual - Page 12
The apartment of the mobile phone and introductions Name Left soft key Right soft key Up key Down key Left key Right key Send key End (Power) key Charger connector Description In standby mode, press left soft key to main menu. In standby mode, press right soft key to Contacts list. In standby mode
Haier C2000 | User Manual - Page 13
signal strength. Indicating in call status. Indicating without network. You have one or several missed call. Indicating the mobile phone is under data service mode currently, such as brew download, PC data service. Indicating the mobile phone is protecting your voice content during a call. 5
Haier C2000 | User Manual - Page 14
Icon 6 Description Indicating the mobile phone is under roaming service mode. Indicating the keypad is locked. Indicating the phone is locked. You have one or several new text messages. You have one or several new voice mail. You have one or several new garbage messages. Indicating
Haier C2000 | User Manual - Page 15
Icon Description Indicating battery power level. 7
Haier C2000 | User Manual - Page 16
2 Getting Started Install and charge the phone 1. Remove the battery cover 2. Insert the RUIM card 3. Install the battery 4. Plug the travel adapter into the phone 8
Haier C2000 | User Manual - Page 17
left of the cursor, press . To save the number, press and select Save number. 2. To end the call, press the End Key. Making phone call using contacts 1. In the standby mode, press or press to access the Main menu
Haier C2000 | User Manual - Page 18
call using speed dial In standby mode, long press a number key to make phone call. See chapter 5 contacts for more information about configuring speed dial. Making a conference call Conference calling is a network service that allows you to take part in a conference call with other participants
Haier C2000 | User Manual - Page 19
key of your phone to adjust the locked, simply press the Send Key. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. Operations during a call During a call press and one of the following options: ¾ Contacts: To the contacts
Haier C2000 | User Manual - Page 20
can prevent you form accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically relocks. When the keypad is locked, calls may be possible to the official emergency number programmed in your phone. Press [*] key for more then 2 seconds to
Haier C2000 | User Manual - Page 21
4 Text Entry Text input method Your phone provides following text input methods: z English input method: input English characters; z Numeric input method: input numeric characters; Input method Icon Letter case Intelligent EN Upper
Haier C2000 | User Manual - Page 22
Numeric 123 - Change the input method z Press [*] to switch between upper case, lower case and word/sentence case; Long press [*] to enter symbol list; z Press [#] to switch between Intelligent, Multi-tap and Numeric mode. Notice: Press [1] to insert common symbol under the intelligent mode or
Haier C2000 | User Manual - Page 23
1. In the standby mode, press to access the Main menu > Contacts > Add new; 2. Change the settings and enter information about the contact (saved in Phone). z Name: Assign a name. z Default: Assign a default group. z Mobile 1/Mobile 2/Home/Office: Add a number in any type. z E-mail: Assign an
Haier C2000 | User Manual - Page 24
: Send the business card. ¾ Edit: Edit the details of the contact. ¾ Delete: Delete the contact from your phone. ¾ Copy: Copy the contact between phone memory and RUIM card memory. ¾ Add to blacklist: Add the first number of the contact to blacklist. ¾ Add to whitelist: Add the first number of the
Haier C2000 | User Manual - Page 25
Notice: If you input the wrong name or the wrong number, the phone will inform you "No match found". Groups 1. In the standby mode, press to access the Main menu > Contacts > Groups; 2. Highlight a group, press and one of the following options: z Rename: Edit the group's name (RUIM
Haier C2000 | User Manual - Page 26
copy selected. z Copy all: Copy all the contacts between phone memory and RUIM card memory. Phone to RUIM: Copy one group to RUIM. RUIM to Phone: Copy all RUIM memory to the default group of Phone. z Copy selected: Copy the contacts you want between phone memory and RUIM card memory. Speed dial Use
Haier C2000 | User Manual - Page 27
location Use this feature to choose storing phone numbers on your RUIM card or in your phone's memory. Memory status Check the number of contacts you have stored in the phone's memory and on the RUIM card. My number Use this feature to check your phone number, or to assign a new number. Changes
Haier C2000 | User Manual - Page 28
service. If your wireless service provider supports this feature, you can send and receive text messages to compatible phones that are also subscribed to the service lists that contain phone numbers and names from your contact list. Notice: When sending messages, your phone may display [Message
Haier C2000 | User Manual - Page 29
receiving and sending text messages. ¾ Memory status: View the amount of memory currently in use for messages. ¾ Voice mail: The mobile phone will notify you on receiving a voice message. Enter the voice message menu to view it. Contact your network carrier for more details about voice messages. 21
Haier C2000 | User Manual - Page 30
the message. ¾ Insert Symbol: Insert a special character. ¾ Insert Expression: Insert an expression. ¾ Insert templates: Insert a predefined template or personalized template. ¾ Insert number: Add a number from Contacts. ¾ Save to draft: Save the message to the draft folder. 22
Haier C2000 | User Manual - Page 31
people. ¾ Delete: Delete the message. ¾ Use number: Call the number, save the number to contacts, send message to the number, or add the number to blacklist or whitelist. ¾ Copy: Copy the message between the phone's memory and RUIM card. ¾ Move to garbage: Move the message to the garbage folder
Haier C2000 | User Manual - Page 32
¾ Move to archive: Move the message to the archive folder. Draft 1. In the standby mode, press to access the Main menu > Messages > Draft; 2. Press to access the following options: ¾ Send: Send the message. ¾ Delete: Delete the message. ¾ Delete all: Delete all messages in draft box
Haier C2000 | User Manual - Page 33
garbage box. ¾ Archive: Delete all messages in the archive box. ¾ Delete selected: Delete the messages according your choice. ¾ Delete all: Delete all messages on your phone. 25
Haier C2000 | User Manual - Page 34
: There are four choices of deferred delivery: Immediate, After 1 hour, After 5 hours and After 1 day. z Validity period: The SMS valid period is that when the contact's phone is power off, the inbox is full and so on situation that it can't receive the SMS, the SMS center will store the SMS sent
Haier C2000 | User Manual - Page 35
>, phone will send a reject message which user edited before. Memory status View the amount of memory currently in use for messages. Voice mail The voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service
Haier C2000 | User Manual - Page 36
options: ¾ View: View the time of the record. ¾ Call: Dial the number. ¾ Save number: Save the number (except emergency number) to the Contacts. ¾ Send message: Send message to the selected number. ¾ Delete: Delete the selected record. ¾ Delete all: Delete all records. ¾ Add to blacklist: Add
Haier C2000 | User Manual - Page 37
calls are previous calls you have dialled from your phone. Delete You can delete any missed calls, received calls, dialed calls, or all calls from phone memory. Call timers You can view the duration of z Total airtimes: Check the total length of all calls. z Reset timer: Reset the call timers. 29
Haier C2000 | User Manual - Page 38
8 Settings The settings menu provides you with various setting options to customize the phone to your preferences and needs. You can also reset the settings to their default status. Display Banner Use this menu to choose whether the display shows a customized banner under the operation logo, when
Haier C2000 | User Manual - Page 39
menu to change the setting of Auto key lock, Input setting, and Time format. Auto key lock Use this menu to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. In the standby mode, press
Haier C2000 | User Manual - Page 40
mode, press to access the Main menu >Settings >Call setting> Answer call> Press send key or Press any key; Auto answer Set the phone to answer the incoming call automatically when the headset inserted. In the standby mode, press to access the Main menu >Settings >Call setting> Auto
Haier C2000 | User Manual - Page 41
Call forward This network service reroutes incoming calls to a phone number that you specify. In the standby mode, press < the feature code by choosing Edit feature code. 4. Enter the number to which calls are to be diverted, and select OK. Call waiting Call if your wireless provider supports this
Haier C2000 | User Manual - Page 42
Call waiting> Enable or Disable or Edit feature code; To activate call waiting, select Enable. To deactivate call waiting, select Disable. You "00", for example the number "+1234456", will be "00123456". ¾ Manual: When user dialled international number start with "+", the number will transfer "+"
Haier C2000 | User Manual - Page 43
> Firewall>Call > Blacklist; 2. Scroll to any empty entry, and press . 3. Enter the number, and press ; or select Search to retrieve a number from your contacts. If you want to change or delete the entry in blacklist, you can use the options and go to one of the following: ¾ View: View
Haier C2000 | User Manual - Page 44
> Call > Whitelist; 2. Scroll to any empty entry, and press . 3. Enter the number, and press ; or select Search to retrieve a number from your contacts. If you want to change or delete the entry in whitelist, you can use the options and one of the following menus: ¾ View: View the
Haier C2000 | User Manual - Page 45
by other person. To access the menu, you must enter the preset lock code. By default, the preset lock code is 0000. In the standby mode, press to access the Main menu >Settings > Firewall> Private > Message, Contacts, or Call history> On or Off; SMS Use this menu to block some numbers for
Haier C2000 | User Manual - Page 46
number: If activated reject garbage number feature, the mobile phone will compare the short message number with the "Spam lock code. By default, the preset lock code is 0000. If none of this work, contact your wireless service provider for help. Phone lock The phone lock feature protects your phone
Haier C2000 | User Manual - Page 47
the Main menu >Settings > Security> Phone lock and one of the following menus: ¾ Lock now: Enable the phone lock right now. ¾ On power up: Phone locked is displayed each time you turn your phone on. ¾ Disable: Disable the phone lock. Theft proof This menu allows your phone to work only with the RUIM
Haier C2000 | User Manual - Page 48
lock code again for verification, and press . When you change your lock code, make sure to remember it. If necessary, write it down and store it in a safe place away from your phone. Call restriction This network service reset Use this menu to reset the phone's settings you have changed. 40
Haier C2000 | User Manual - Page 49
Clear memory Use this menu to clear all data (include Call History, Contacts (RUIM), Contacts (Phone) or Clear All) that you have stored. Phone info You can get SW version, HW version, and PRL version. 41
Haier C2000 | User Manual - Page 50
9 Profiles Profiles define how your phone reacts when you receive a call or message, and other settings for each of the available profiles can be left at You can use the [Up/Down/Left/Right] navigation keys to adjust the volume. ¾ Alerts: Use this menu to change the phone alerts for the following: 42
Haier C2000 | User Manual - Page 51
length of your call. z Call connect beep: Set the phone to beep when an outgoing call connects to the system. z Call end beep: Set the phone to beep when a call end to the system. z Service change: Enable or disable the alert for service change. z Fail on outgoing: Enable or disable the alert for
Haier C2000 | User Manual - Page 52
10 Fun and Utilities Your phone contains features to help organize your life, including Alarm, Scheduler, Calculator, and Stopwatch. Alarm Use this menu to set alarms. The alert type for a normal
Haier C2000 | User Manual - Page 53
1. In the standby mode, press to access the Main menu > Fun and Utilities > Scheduler; 2. View the current calendar. Press left soft key to enter the options, press options to access functions. The functions include View, Add, Delete, Delete expired and Delete All. ¾ View: To examine details
Haier C2000 | User Manual - Page 54
Stopwatch 1. In the standby mode, press to access the Main menu > Fun and Utilities > Stopwatch; 2. Press to start the stopwatch. 3. Press to pause the stopwatch. 4. Press to continue the stopwatch. 5. Press to reset the stopwatch. 46
Haier C2000 | User Manual - Page 55
11 Games Games Your phone have 2 games available. LinkLong The snake will get longer the game sound effect. z Score: List the top 5 scores achieved. z Help: Give the game operation instructions. z About: Show the version and copyright information. z Exit: Exit LinkLong game menu. MagicBlock Put 3 or
Haier C2000 | User Manual - Page 56
paused game. z Start: Start a new game. z Sound: Enable or disable the game sound effect. z Score: List the top 5 scores achieved. z Help: Give the game operation instructions. z About: Show the version and copyright information. z Exit: Exit MagicBlock game menu. 48
Haier C2000 | User Manual - Page 57
Apps, Main Menu View, Screen Savers and View Log. z Help: You can inquire related help information in "Help" menu. Notice: The number of applications which download or saved in phone is only related with the capacity of phone memory, not the RUIM card. 49
Haier C2000 | User Manual - Page 58
access ring stored in the phone's memory. Ring You could play or use the ringers that in download folder. 14 SMS services This menu option allows you to access a range of SMS based services that help you do more. Simply select the desired service from the service menu. Choose from Ringtones, Logos
Haier C2000 | User Manual - Page 59
inserted the R-UIM card; Please check if your R-UIM card is valid. The mobile phone displays "Input PUK Code" Please communicate with the service provider to get the PUK code and use it to unlock. Can not make phone call Please check if the phone number is valid. Please check if you are in
Haier C2000 | User Manual - Page 60
Common problems Weak talk quality The contact can not get your voice when making phone call Receiver sound is too low The mobile phone has a weak receive signal or usually drop in the phone call The screen display the information such as "No Service" Check item Please check if the phone signal is
Haier C2000 | User Manual - Page 61
z Do not use your phone at places for medical treatment where it is prohibited to use mobile phones. z When you use your phone near someone who is suffering Environment Switch off your phone when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such
Haier C2000 | User Manual - Page 62
in the area you are in, and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products. 54
Haier C2000 | User Manual - Page 63
As with other mobile radio transmitting equipment, users are advised that for the satisfactory (held to your ear with the antenna pointing over your shoulder). Care and Maintenance z Keep your phone and all its parts and accessories out of the reach of small children and pets. They may accidentally
Haier C2000 | User Manual - Page 64
. Battery z Never use a charger or battery that is damaged in any way. z Use the battery only for its intended purpose. If you use the phone near the network's base station, it uses less power. Talk and standby time are greatly affected by the signal strength on the cellular network and
Haier C2000 | User Manual - Page 65
battery in hot or cold places because the capacity and lifetime of the battery will be reduced. Try to keep the battery at room temperature. A phone with a hot or cold battery may not work temporarily, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures

Section	Page
1 Getting to Know Your Phone	9
Packing list	9
 TBD	9
 TBD	9
 TBD	9
Basic specification	9
 Size: 99.6mm [L] ×42mm [W] ×14.0mm [H]	9
 Weight: TBD (including 800mAh Li-polymer battery)	9
 Standby Time: about 115 hours	9
 Talking Time: about 3 hours	9
Mobile phone appearance	10
Mobile phone view	10
The apartment of the mobile phone and introductions	12
Icon bar	13
2 Getting Started	16
Install and charge the phone	16
3 Basic Functions	17
Switching On/Off	17
 In the power off status, long press the Power Key to switch on the phone.	17
 In the power on status, long press the Power Key to switch off the phone.	17
Making phone call	17
Making phone call using the keypad	17
1. In the standby mode, enter the phone number you want to dial, and press the Send Key to make the call.	17
2. To end the call, press the End Key.	17
Making phone call using contacts	17
1. In the standby mode, press <Contacts> or press <Menu> to access the Main menu > Contacts;	17
2. Select List to view the contacts list, and press Up/Down key to choose a contact, or select Search to search out the contact you want to call, either by name or by number.	18
3. Press the Send Key to make the phone call.	18
Making phone call using last dialled number	18
1. In the standby mode, press the Send Key to display the last 10 numbers dialled.	18
2. Scroll to the number or name you wish to redial, and press the Send Key.	18
Making phone call using speed dial	18
Making a conference call	18
1. Make a call to the first participant.	18
2. Enter the phone number of the second participant; or retrieve a number from your Contacts, press <Search> and find out the number you want to call.	18
3. Press the Send Key, The first participant is put on hold.	18
4. When the second participant picks up, press the Send Key to connect the calls.	18
5. To end the conference call, press the End Key.	18
Answering the call	19
Answer or silence an incoming call	19
1. To answer the call, press the Send Key or select <Accept>.	19
2. To reject the call, press the End Key or select <Reject>.	19
Adjust the earpiece volume	19
Answer a call with the keypad locked	19
Operations during a call	19
Keypad lock	20
4 Text Entry	21
Text input method	21
 English input method: input English characters;	21
 Numeric input method: input numeric characters;	21
Change the input method	22
 Press [*] to switch between upper case, lower case and word/sentence case;	22
 Press [#] to switch between Intelligent, Multi-tap and Numeric mode.	22
5 Contacts	23
Add new	23
1. In the standby mode, press <Menu> to access the Main menu > Contacts > Add new;	23
2. Change the settings and enter information about the contact (saved in Phone).	23
 Name: Assign a name.	23
 Default: Assign a default group.	23
 Mobile 1/Mobile 2/Home/Office: Add a number in any type.	23
 E-mail: Assign an e-mail address.	23
 URL: Assign a URL address.	23
 Note: Add a memo about the person.	23
3. Press <Options> and one of the following:	23
 Edit: Enter the name, the phone number, or other details.	23
 Save: Save the record in the Contacts list.	24
List	24
1. In the standby mode, press <Menu> to access the Main menu > Contacts > List;	24
2. Press <Options> and one of the following options:	24
Search	24
1. In the standby mode, press <Menu> to access the Main menu > Contacts > Search;	24
2. Press left soft key to search a contact you want:	24
 By name: Search out the contact through inputting the name.	24
 By number: Search out the contact through inputting the number.	24
Groups	25
1. In the standby mode, press <Menu> to access the Main menu > Contacts > Groups;	25
2. Highlight a group, press <Options> and one of the following options:	25
 Rename: Edit the group’s name (RUIM and Default can not be renamed).	25
 Ringer: Set special ring to the group.	25
 List: View the members of the group.	25
 Add new: Add a record from Contacts (RUIM can not be added new).	25
Copy	26
1. In the standby mode, press <Menu> to access the Main menu > Contacts >Copy;	26
2. The Copy includes copy all, copy selected.	26
 Copy all: Copy all the contacts between phone memory and RUIM card memory.	26
 Copy selected: Copy the contacts you want between phone memory and RUIM card memory.	26
Speed dial	26
1. In the standby mode, press <Menu> to access the Main menu > Contacts > Speed dial;	26
2. Scroll to any empty slot, and press <Assign>, or if a number has already been assigned to the key, press <Options> > and select View, Edit or Delete.	26
3. You can also View, Edit, Reset a Voice mail. Press <Options> when Voice mail is highlighted.	26
Delete	27
1. In the standby mode, press <Menu> to access the Main menu > Contacts > Delete;	27
2. Select Delete all to delete all contacts.	27
Storage location	27
Memory status	27
My number	27
Use this feature to check your phone number, or to assign a new number. Changes made here do not affect the actual subscriber numbers on your RUIM card.	27
Messages	28
Text message (SMS)	28
Text message menus	29
In the standby mode, press <Menu> to access the Main menu > Messages and one of the following menus:	29
Write and send SMS messages	30
1. In the standby mode, press <Menu> to access the Main menu > Messages > Write message;	30
2. Enter your message.	30
3. Press <Options> and select Send.	30
4. Enter a destination number.	30
5. Press the <OK>to send the message.	30
Using options while writing SMS messages	30
While composing a message, press <Options> to access the following options:	30
Text message options	31
Inbox	31
1. In the standby mode, press <Menu> to access the Main menu > Messages > Inbox;	31
2. While viewing a message, press <Options> to access the following options:	31
Outbox	31
1. In the standby mode, press <Menu> to access the Main menu > Messages > Outbox;	31
2. While viewing a message, press <Options> to access the following options:	31
Draft	32
1. In the standby mode, press <Menu> to access the Main menu > Messages > Draft;	32
2. Press <Options> to access the following options:	32
Garbage	32
1. In the standby mode, press <Menu> to access the Main menu > Messages > Garbage;	32
2. Press <Options> to access the following options:	32
Archive	32
1. In the standby mode, press <Menu> to access the Main menu > Messages > Archive;	32
2. While viewing a message, press <Options> to access the following options:	32
Templates	33
1. In the standby mode, press <Menu> to access the Main menu > Messages > Templates;	33
2. Select the template message you want to use.	33
3. Press <Options> to edit, delete and use the template.	33
Delete messages	33
In the standby mode, press <Menu> to access the Main menu > Messages >Delete messages and one of the following options:	33
Message setting	34
In the standby mode, press <Menu> to access the Main menu > Messages > Message setting and one of the following options:	34
 Storage location: Allow you to select a storage location for a message.	34
 Priority: Message sending priority levels are classified as: Normal, Urgent and	34
 Delivery report: Set the network to inform you when your messages have been	34
 Deferred delivery: There are four choices of deferred delivery: Immediate, After 1 hour, After 5 hours and After 1 day.	34
 Validity period: The SMS valid period is that when the contact’s phone is power off,	34
the inbox is full and so on situation that it can’t receive the SMS, the SMS center will store the SMS sent time, if longer than the valid period, the SMS would be deleted and no longer sent to the contact again. The SMS valid period has the following options: Default, 30 minutes, 1 hour, 2 hours, 12 hours, 1 day, 2 days or 3 days.	34
 Auto save: The sent or unsent message will be automatically saved in the outbox.	34
 Auto delete: Auto deletes the message when message box full.	34
 SMS on call reject: If you select Enable, when receive an incoming call, press <Reject>, phone will send a reject message which user edited before.	35
Memory status	35
View the amount of memory currently in use for messages.	35
Voice mail	35
 Listen: Connect to the voicemail server to listen to your messages.	35
 View details: View the detail of last voicemail.	35
 Voice mailbox number: Edit the voice mail server number.	35
 Clear voice mail icon: Clear the prompt icon in standby mode.	35
7 Call history	36
Missed calls	36
1. In the standby mode, press <Menu> to access the Main menu > Call history;	36
2. Go to Missed calls, Received calls, or Dialled calls, select a call record,	36
press <Options> to access the following options:	36
Received calls	37
Dialled calls	37
Delete	37
Call timers	37
 Last call: Check the length of your last call.	37
 Received calls: Check the total length of all calls you have received.	37
 Dialled calls: Check the total length of all calls you have dialled.	37
 Total airtimes: Check the total length of all calls.	37
 Reset timer: Reset the call timers.	37
8 Settings	38
Display	38
Banner	38
Backlight	38
Contrast	38
Phone setting	39
Auto key lock	39
Input setting	39
Time format	39
Call setting	40
Answer call	40
Auto answer	40
Voice privacy	40
Auto redial	40
Call forward	41
1. Select call forward options:	41
2. Select the type of calls to be diverted.	41
3. To activate call diverting, select Enable.	41
4. Enter the number to which calls are to be diverted, and select OK.	41
Call waiting	41
International prefix	42
Call Time	42
Firewall	43
Call	43
Blacklist	43
1. In the standby mode, press <Menu> to access the Main menu >Settings > Firewall>Call > Blacklist;	43
2. Scroll to any empty entry, and press <Assign>.	43
3. Enter the number, and press <OK>; or select Search to retrieve a number from your contacts.	43
Whitelist	44
1. In the standby mode, press <Menu> to access the Main menu >Settings > Firewall> Call > Whitelist;	44
2. Scroll to any empty entry, and press <Assign>.	44
3. Enter the number, and press <OK>; or select Search to retrieve a number from your contacts.	44
Private	44
SMS	45
1. Scroll to any empty entry, and press <Assign>.	45
2. Enter the number, and press <OK>; or select Search to retrieve a number from your contacts.	45
 View: View the number.	45
 Edit: Edit the number.	45
 Delete: Delete the entry.	45
 Delete All: Delete all entries.	45
 Reject Spam number: If activated reject garbage number feature, the mobile phone will compare the short message number with the \	46
 Only receive phone message: After activating this feature, the mobile phone will judge if the message came from a normal mobile phone number; if not, this message will be regarded as garbage message; if the message came from a normal phone number, it will be regarded as normal message.	46
 Off: Deactivate SMS firewall on your phone.	46
Security	46
Phone lock	46
Theft proof	47
PIN management	47
Change security code	48
1. In the standby mode, press <Menu> to access the Main menu >Settings > Security > Change security code;	48
2. Enter your four-digit lock code and press <OK>.	48
3. Enter the new lock code (only 4 characters), and press <OK>.	48
4. Enter the new lock code again for verification, and press <OK>.	48
Call restriction	48
Factory reset	48
Clear memory	49
Phone info	49
9 Profiles	50
Activate	50
Personalise	50
 Power on/off: Enable or disable the alert for power on or off.	51
 Low battery beep: You can choose to switch Enable/Disable.	51
 Minute beep: Set the phone to beep ten seconds before every minute during a call to keep you informed of the length of your call.	51
 Call connect beep: Set the phone to beep when an outgoing call connects to the system.	51
 Call end beep: Set the phone to beep when a call end to the system.	51
 Service change: Enable or disable the alert for service change.	51
 Fail on outgoing: Enable or disable the alert for outgoing call failed.	51
 Charger beep: Set the phone to beep when plug the adapter.	51
Rename	51
10 Fun and Utilities	52
Alarm	52
Setting an alarm	52
1. In the standby mode, press <Menu> to access the Main menu > Fun and Utilities > Alarm;	52
2. Select an alarm, and each alarm options:	52
 Time: Enter the time for alarm to ring.	52
 Period: Select an alert period for the alarm.	52
 On: Turn on or off the alarm.	52
Scheduler	52
1. In the standby mode, press <Menu> to access the Main menu > Fun and Utilities > Scheduler;	53
2. View the current calendar. Press left soft key to enter the options, press options to access functions. The functions include View, Add, Delete, Delete expired and Delete All.	53
Calculator	53
1. In the standby mode, press <Menu> to access the Main menu > Fun and Utilities > Calculator;	53
2. Enter the first number.	53
3. Press one of the navigation keys to access the math function you want.	53
4. Press the # key to view the result.	53
5. If necessary, repeat from step 3 to continue the calculation.	53
Stopwatch	54
1. In the standby mode, press <Menu> to access the Main menu > Fun and Utilities > Stopwatch;	54
2. Press <Start> to start the stopwatch.	54
3. Press <Pause> to pause the stopwatch.	54
4. Press <Resume> to continue the stopwatch.	54
5. Press <Reset> to reset the stopwatch.	54
11 Games	55
Games	55
LinkLong	55
 Resume: Go on with your paused game.	55
 Start: Start a new game.	55
 Sound: Enable or disable the game sound effect.	55
 Score: List the top 5 scores achieved.	55
 Help: Give the game operation instructions.	55
 About: Show the version and copyright information.	55
 Exit: Exit LinkLong game menu.	55
MagicBlock	55
 Resume: Go on with your paused game.	56
 Start: Start a new game.	56
 Sound: Enable or disable the game sound effect.	56
 Score: List the top 5 scores achieved.	56
 Help: Give the game operation instructions.	56
 About: Show the version and copyright information.	56
 Exit: Exit MagicBlock game menu.	56
12 TATA zone	57
 MobileShop: Consist of Catalog, Search, About Download.	57
 Settings: You could access following options: Order Apps, Move Apps, Manage Apps, Main Menu View, Screen Savers and View Log.	57
 Help: You can inquire related help information in “Help” menu.	57
13 My data	58
Ring	58
SMS services	58
15 Care And Maintain	59
16 Safe Information	61
Electronic Device	61
Hospital	61
 Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU).	61
 Do not use your phone at places for medical treatment where it is prohibited to use mobile phones.	61
 When you use your phone near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not influence the person.	61
Storage Environment	61
Children Safety	62
 Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance.	62
 Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous.	62
 Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings.	62
Operating Environment	62
Care and Maintenance	63
 Keep your phone and all its parts and accessories out of the reach of small children and pets. They may accidentally damage these things or choke on small parts.	63
 Keep the phone dry. Precipitation, humidity, and liquids contain minerals that corrode electronic circuits.	63
 Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.	63
 Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.	63
 Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.	63
 Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.	63
 Do not drop, knock, or shake the phone. Rough handling can break internal circuit boards.	63
 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and water solution.	64
 Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.	64
 Do not put the phone in or on heating devices, such as a microwave oven, stove, or radiator. The phone may explode when overheated.	64
 When the phone or battery gets wet, the label indicating water damage inside the phone changes colour. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired.	64
Emergency Call	64
Battery	64
 Never use a charger or battery that is damaged in any way.	64
 Use the battery only for its intended purpose.	64
 Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery.	65
 If left unused, a fully charged battery will discharge itself over time.	65
 Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.	65
 Do not leave the battery in hot or cold places because the capacity and lifetime of the battery will be reduced. Try to keep the battery at room temperature. A phone with a hot or cold battery may not work temporarily, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0°C (32°F).	65

Match case Limit results 1 per page

Welcome to use C2000 mobile phone from [

Company

] Technologies Co.., Ltd.

[

Company

]

C2000 CDMA Mobile Phone User Manual