Haier HL19RW User Manual - Page 25

Menu Operations Function Menu Options 1. Press MENU button and CH+/CH- until the following menu appears on the screen. Video Language OSD Timeout English Short Audio OSD Transparency Middle Screen Mode Channel Blue Screen Full screen On DPMS On Function Time Setup Lock Closed Caption Default Function CH+/- Select EXIT Back VOL+/- 2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and down to select the desired option . 3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved . Function: Language: Press VOL+/VOL- button to select language of the OSD. OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the time of the OSD display. OSD Transparency: Press VOL+/VOL- to select among Low, High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity. Screen Mode: Press VOL+/VOL- to select among Full Screen, Normal, Wide, Zoom and Cinema to change the display mode. ( display mode may differ from different inputs) Blue Screen: Press VOL+/VOL- to select On , the screen will be in blue after 3 seconds if there is no signal. DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically. Time Setup: Press VOL+/OK to enter the submenu. Time Zone: Press VOL+/VOL- to select the appropriate time zone.