Haier HSU18VC7-W User Manual - Page 14
Emergency, operation
View all Haier HSU18VC7-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation Emergency operation and test operation Emergency Operation: • Carry out this operation only when the remote controller is defective or lost. • When the emergency operation switch is pressed, a " Pi " sound starts once, which means the start of this operation. • In this operation, it is not possible to change the settings of temperature and air flow speed, it is also impossible to do an operation by the timer. DI II 0 • Follow the requirements below. • Room Designated Timer Air flow Operation temperature temperature mode speed mode More than 74°F 80°F CONTINUOUS AUTO COOL Less than 74°F 74°F CONTINUOUS AUTO HEAT _} If an air conditioner is a model for both cooling and heating. Cooling when the room temperature at the start of operation is above 74°F . Heating when the room temperature at the start of operation is less 74°F . 1 Test operation: • Use this switch in the test operation when the room temperature is less 60°F, do not use it in the normal operation. Continue to press the test operation switch for more than 5 seconds. After you hear the "Pi" sound twice, release your finger from the switch, the cooling operation starts with the air flow speed setting "Hi". DI II ID J Removal of the restriction of emergency or test operation: • Press once more the emergency operation switch, or manipulate through the remote controller, a "Pi" sound causes the restriction of emergency or test operation to be removed. • When the remote controller is manipulated for the removal, then the selected operation by the remote controller. 12