Haier HWF05XCR User Manual - Page 14

Preparing The Window

Get Haier HWF05XCR PDF manuals and user guides View all Haier HWF05XCR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

ENGLISH PREPARING THE WINDOW 1. Measure the width of the window opening. (See Fig.13) 2. Mark the center line on the inside of the windowsill with a pencil. (See Fig.14) WIDTH OF WINDOW OPENING Fig. 13 CENTER LINE Fig. 14 HEIGHT LENGTH WIDTH WIDTH WIDTH CENTER NOTES AND WARNINGS: • Be sure your air conditioner does not fall out of the window opening during installation or removal. • Do not block the air discharge or air intake areas on the front panel. • Do not block the louvers on the outside of the air conditioner. 3. Center the air conditioner in the window sill. Make sure to place the unit so that it is resting on the windowsill with a ¼" to ½" downward tilt towards the outside. Lower the window sash behind the top channel to hold the unit in place. (See Fig.15) Fig. 15 Lower Window Sash Top Channel NOTE: The appearance of your model may differ from the one shown. 4. Loosen the screw located on the lower-right hand corner of the air conditioner. 5. Slide the side bracket over the screw. The side bracket should be resting on the window sill. (See Fig.16) 6. Partially tighten the screw. Secure the unit before tightening completely. 7. Use 1/8" drill bit to drill a starter hole through the holes in the side bracket into the window sill. 8. Using two (2) 1" wood screws, attach the side bracket to the window sill. 9. Repeat for side bracket installation on the left-hand side of the air conditioner. PAGE 12 HOW TO INSTALL Fig. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
1. Measure the width of the window opening.
(See Fig.13)
2.
k
r
a
M
the center line on the inside of the windowsill
with a pencil.
(See Fig.14)
•
Do not block the air discharge or air intake areas on the front panel.
•
o
D
not block the louvers on the outside of the air conditioner.
3.
r
e
t
n
e
C
the air conditioner in the window sill.
Make sure to place the unit so that it is resting on the
windowsill with a ¼" to ½" downward tilt towards the
outside. Lower the window sash behind the top channel
to hold the unit in place.
(See Fig.15)
ENGLISH
PREPARING THE WINDOW
NOTES AND WARNINGS:
•
Be
sure
your
air
conditioner
does
not
fall
out
of
the
window
opening
during
installation
or
removal.
PAGE 12
HOW TO INSTALL
WIDTH
WIDTH OF
WINDOW OPENING
CENTER LINE
Fig. 13
Fig. 14
NOTE:
The appearance of your model may
diff
er from the
one shown.
4. Loosen the screw located on the lower-right hand corner
of the air conditioner.
5.
e
d
i
l
S
the side bracket over the screw. The side bracket
should be resting on the window sill.
(See Fig.16)
6. Partially tighten the screw. Secure the unit before tightening completely.
7.
e
s
U
1/8" drill bit to drill a starter hole through the holes in the side
bracket into the window sill.
8.
g
n
i
s
U
two (2) 1" wood screws, attach the side bracket to the
window sill.
9. Repeat for side bracket installation on the left-hand side of the air
conditioner.
Fig. 16
CENTER
Fig. 15
Top Channel
Lower Window Sash