Haier HWM75-7288 User Manual - Page 11
Use the operation buttons
View all Haier HWM75-7288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Use the operation buttons Off On: indicate the program about to run,or indicate the selected mode or indicate the water level Flashing: indicate the running program z It displays "--" during detecting. z It displays total remained time during the running program (min). z It displays remained reserved time during reserve program hour z It displays abnormal symbol in abnormal situation.(See to Page 14) z The digitron displays the time remained (in minute) before the washing is ¿nished. z Push down the reserve button. The reserve indicator light is on the digitron displays the reserve time of ¿nishing washing (in hour). z When the machine is started, the reserve indicator light is on, indicating that the reserve function is running. z Push the On/Off button to switch on the power. z When the power is on, push it again to switch off the power. z Push the On/Off button to switch on the power.If the start/pause button is not pushed, the washing machine will automatically switch off the power after 5 minutes. After the power is switched on,press it to start the machine. z During working, push it to pause. z During pause, push this button to restart and go on working z The washing machine can detect the laundries automatically during the STANDARD program After detection, it will set the water level to suitable value among 30L,40L and 50L automatically. z The water level decided may be different from actual value because of the different moisture level of the laundries. z You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting. z If there's water inside the tub, the machine cannot detect the laundries and will display water level 40L .If wet laundries are put in, it may display water level 50L. You must set suitable water level by yourself. z If quick program is selected, it will display water level 24L. z If tub dry program is selected, the water level will not respond. z During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overÀow water level, the machine will stop adding water. z The rinsing water level is one water level higher than the washing water level( except the maximal and man-rated water level). Program Applicable situation SOAK Washing the relatively big thick or very dirty laundries STANDARD SOFT Common washing If "STANDARD" program is set, the machine will execute fuzzy detection. The computer will set the water level and washing time as per the cloth and quantity of the laundries.The whole procedure is under automatic control. Washing the woollen textiles QUICK Posthaste wash of the laundry under 2.0 kg with light soil. The water level will automatically set 24L. WASH Just run the washing cycle without drainage cycle. The detergent was left inside the drum and can be recycled. RINSE Remove the left detergent from the clothes and then rinse the clothes SPIN When the clothes are washed or the clothes are quite wet, extra spin is needed. TUB DRY Drying the inner tub and the outer tub, which can avoid growing mildew. 11