Haier HWM75-7288 User Manual - Page 5
Installation and adjustment
View all Haier HWM75-7288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. After you open the package, please lean the washing machine gently down on soft items (like the towel cloth, blanket, ect. ). Install the bottom plate to the bottom of the machine, then lift the machine up gently. See to the figure: Front Back Soft items Two claws at the bottom cover shall be inserted in two bar-shaped holes in the stand. Make sure the claws are firmly in place. Section I enlarging Fasten the bottom plate to base frame with one screw Bottom plate The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 2°. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: z Confirm it's horizontal: Hang the lead line to check if it is horizontal. z Adjust the adjustable foot: To twist the adjustable foot, please ¿rst lift up the side of the foot slightly, and then you can twist the two adjustable feet. Please make sure to keep the washing machine in balance. High Low The adjustable foot 5