Haier HWR05XCK User Manual - Page 12

4. Adjust the temperature between 61ºF and 86ºF (16ºC and 30ºC). NOTE: In Fan mode, the temperature cannot be set. 5. Press TIMER. Timer On indicator light on the air conditioner control panel will flash. Display will show remaining hours before the air conditioner will turn on. 6. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours. 7. Timer On indicator light on the air conditioner control panel will remain on. To clear Timer delay program: NOTE: Air conditioner can be either on or off. 1. Press TIMER once after it has been programmed. Display on the air conditioner control panel will show remaining time. 2. While the display is showing the remaining time, press TIMER untill Timer indicator light turns off. To see or change the remaining time (in hours): Timer Off : 1. Press TEMP/TIME once after it has been programmed. Display on the air conditioner control panel will show remaining time. 2. While the display is showing the remaining time, press the TEMP/TIME up or down arrow button to increase or decrease the time. 3. After 5 seconds, the display on the air conditioner control panel will show the current room temperature. Timer On : 1. Display on the air conditioner control panel will show remaining time. 2. While the display is showing the remaining time, press the TEMP/TIME up or down arrow button to increase or decrease the time. Changing Air Direction Use the tab to direct the airflow right or left. A A. Tab Normal Sounds When your air conditioner is operating normally, you may hear sounds such as: ■ Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser. ■ Air movement from the fan. ■ Clicks from the thermostat cycle. ■ Vibrations or noise due to poor wall or window construction. ■ A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off. 12