Haier HWR05XCK User Manual - Page 7

Position Air Conditioner NOTES: ■ Handle the air conditioner gently. ■ Be sure your air conditioner does not fall out of the opening during installation or removal. ■ The place where the power cord exits the air conditioner should be no more than 6 ft (183 cm) from a grounded outlet. ■ Do not block the louvers in the front panel. ■ Do not block the louvers on the outside of the air conditioner. Center the air conditioner in the window. Make sure the bottom guide of the air conditioner drops into the notches of the basepan angle.Lower the window sash behind the top channel to hold the cabinet in place NOTE: Your model may differ from the one shown. Attach Side Curtains to Window 1. Pull the left-hand curtain out until it fits into the window channel. 2. Use a 1⁄8" drill bit to drill a starter hole through the top hole in the side curtain and into the window sash. 3. Insert one of the 31⁄32" screws through the top hole of the lefthand curtain and into the window sash. 4. Repeat for the right-hand curtain. Top View B A C A. Side curtain against window channel B. Window sash behind top channel C. Bottom channel in behind windowsill A B 5. Use a 1⁄8" drill bit to drill a starter hole through the bottom hole in the side curtain and into the window frame. 6. Insert one of the 31⁄32" screws through the bottom hole of the left-hand curtain and into the window frame. 7. Repeat for the right-hand curtain. Bottom View CD A. Window frame B. Top channel C. Bottom guide D. Window lock bracket 7