Haier LY24M3 User Manual - Page 5
Electrical Connections - bush manual
View all Haier LY24M3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ELECTRICAL CONNECTIONS CONNECTING TO POWER Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following: PLUG REPLACEMENT If you need to replace the fitted plug: WARNING Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse. If in doubt, consult a qualified electrician. As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal, which is marked with N or coloured blue. The wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. The green and yellow wire must be connecting to the terminal marked with the letter E or the earth symbol . Always ensure that the plug cord grip is fastened correctly. If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be ASTA approved. If in doubt contact a qualified electrician. WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE. 01Safety and warnings BUSH|Full HD 1080p LCD TV | User Manual | Helpline:0845 604 0105 P.04