Hamilton Beach 04160C Use & Care - Page 10
Checking the Filters
View all Hamilton Beach 04160C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
840129900 ENv02.qxd 11/1/04 11:02 AM Page 10 Checking the Filters A special filter check gauge is included with your air purifier to allow you to check the condition of the filters. It is stored in a compartment behind the front intake grille. See item 7 on page 4 for location. The HEPA filter should last approximately 12 months with continuous use, less in areas with a high level of airborne particles such as dust or pollen. The carbon pre-filter will last approximately three months. NOTE: You must reinstall and snap the intake grille before checking the filters with the gauge. The air purifier will not operate if the grille is not in place. 1 Insert either end of the filter check gauge into the recessed hole on the top of outlet grille. Turn the fan on QuickClean.™ 2 Filter(s) OK The colored cylinder should float up the filter check gauge. If it does not move from the bottom of the gauge, the filter(s) are clogged and need to be replaced. Replace Filter(s) 10