Hamilton Beach 67500G Use and Care Manual - Page 6

How to Use

Page 6 highlights

How to Use Wash fruits and vegetables. NOTE: Some fruits and vegetables, such as carrots and cucumbers, will not need to be cut since they will fit into feed chute whole. Pits should be removed from any stone fruits before juicing. It is recommended that fruits or vegetables such as oranges, melons, or mangoes are peeled before placing in unit to minimize impact on juice flavor. 1. Ensure that unit is correctly assembled (see page 5) and place a glass or container under Spout. 4. To minimize cleanup, place a 100% compostable large storage bag or grocery bag in Pulp Container to collect pulp. When juicing is completed, simply remove bag containing pulp. NOTE: Do not allow Pulp Container to overfill since this may prevent correct operation or damage unit. 6 w WARNING Laceration Hazard. Never use fingers to push food down the feed chute or to clear the feed chute. Always use the food pusher provided. 2. Plug into outlet. Press ON/OFF (I/ ) Switch to ON (I). 3. With motor running, place food down Feed Chute. Using Food Pusher, gently guide food down Feed Chute. To extract maximum amount of juice, always push Food Pusher down slowly. Juice will flow into glass or other container and separated pulp will accumulate in Pulp Container. NOTE: Pulp Container can be emptied during juicing by turning Juice Extractor OFF ( ) and then carefully removing Pulp Container. (Replace empty Pulp Container before continuing to juice.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

6
How to Use
w
WARNING
Laceration Hazard.
Never use fingers to push food down the feed chute or to
clear the feed chute. Always use the food pusher provided.
Wash fruits and vegetables.
NOTE:
Some fruits and
vegetables, such as carrots and
cucumbers, will not need to be
cut since they will fit into feed
chute whole. Pits should be
removed from any stone fruits
before juicing. It is recommended
that fruits or vegetables such as
oranges, melons, or mangoes are
peeled before placing in unit to
minimize impact on juice flavor.
1.
Ensure that unit is correctly
assembled (see page 5) and
place a glass or container
under Spout.
2.
Plug into outlet. Press ON/OFF
(
I
/
) Switch to ON (
I
).
3. With motor running, place
food down Feed Chute.
Using
Food Pusher, gently guide
food down Feed Chute.
To
extract maximum amount
of juice, always push Food
Pusher down slowly.
Juice will flow into glass or
other container and separated
pulp will accumulate in Pulp
Container.
NOTE:
Pulp Container can
be emptied during juicing by
turning Juice Extractor OFF
(
) and then carefully
removing Pulp Container.
(Replace empty Pulp Container
before continuing to juice.)
4.
To minimize cleanup, place a
100% compostable large
storage bag or grocery bag in
Pulp Container to collect pulp.
When juicing is completed,
simply remove bag containing
pulp.
NOTE:
Do not allow Pulp
Container to overfill since this
may prevent correct operation
or damage unit.