Hamilton Beach HBS1200 Operation Manual - Page 11
Caring for the Ice Shaver/Blender
UPC - 040094908394
View all Hamilton Beach HBS1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Caring for the Ice Shaver/Blender Cleaning Instructions-General wWARNING wWARNING Electrical Shock Hazard Unplug unit before general cleaning. Do not immerse base in water or other liquid. Failure to follow these instructions can result in death, fire, or electrical shock. Cut Hazard Unplug unit before general cleaning. Use extreme care when cleaning ice hopper and removing ice agitator. Failure to follow these instructions can result in cuts. General cleaning Do not allow food residue to dry on any part of the unit. Wash and rinse container, blender blade assembly and base after each use, or whenever it will not be used again within one hour: 1. Wipe the exterior of the base with a damp cloth or sponge, then wipe dry with a soft towel. The base contains electrical components: do not immerse, use a high-pressure washer, or use a dishwasher to clean the base. 2. Take particular care not to scratch the display screen and exterior of the ice hopper. Use only a soft, slightly damp cloth. Do NOT use any sort of harsh or abrasive cleaners, or dry paper towel; these can scratch the display window. Recommended Sanitizing Solution: The following solution is recommended when sanitizing the blender jar and blades, and to sanitize the inside of the ice hopper: The sanitizing solution should consist of 1 tablespoon of household bleach per 1 gallon of clean, cool water (60° F, 16° C) mixed according to the instructions on the bleach. When using a sanitizing solution other than that recommended, the sanitizing solution concentration should be tested using commercially available test strips and should indicate a concentration between 100 and 200 parts per million of bleach to water. Ice Hopper and Agitator The ice hopper and agitator assembly should be washed and sanitized before the unit is first used, and any time the unit has not been used for several days. 1. Remove the ice hopper cover and lift out the inner hopper. 2. Loosen the thumbscrew on the agitator assembly and lift the assembly up and out of the ice pool. WARNING: Shaver blade is sharp! 3. Remove the ice chute by pressing the unlock button and pulling down. 4. Wipe the inside of the ice pool with a clean soft cloth dampened with sanitizing solution (see Cleaning Instructions for recommended sanitizing solution). 5. Rinse the ice chute, the agitator assembly and inner hopper in sanitizing solution, and allow to air dry. Wipe the shaving pool, shaver blade, and ice deflector with a clean, soft cloth dampenend with sanitizing solution (see Recommended Sanitizing Solution). 6. Once all parts are dry, slide the agitator assembly carefully back into place and secure with the thumbscrew. Align the bosses on inner hopper with the matching holes in the ice hopper and press gently down into place. Ensure that the interlock is correctly aligned. Reinstall the ice chute by sliding it back until it clicks into place. 11