Harman Kardon AP2500 Owners Manual - Page 3
Ap2500, Owner's, Manual
View all Harman Kardon AP2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
AP2500 OWNER'S MANUAL Congratulations on your choice of the Harman Kardon AP2500 Stereo Preamplifier. In order to obtain the best performance from this preamplifier, please be sure to read this owner's manual and use the AP2500 only in accordance with its instructions. The special features of this unit include : Higher Fidelity through Simplicity The AP2500 is an extreme expression of higher fidelity through attention to the basics of preamplifier design and construction. All of the key elements that produce sound have been meticulously designed to have the lowest noise and distortion, widest bandwidth and highest isolation of any product of its kind. All of the features that are rarely used and tend to complicate the audio signal path have been deliberately deleted. The resulting performance is a unique combination of exceptional sound quality and value. Ultrawide Bandwidth The bandwidth of this unit is exceptionally wide and is independent of negative feedback. This improves transient accuracy and phase linearity. Low Negative Feedback This unit has been designed to have low distortion and wide bandwidth without high negative feedback. This further improves its dynamic accuracy. Discrete Component Circuitry In order to achieve the above goals, all discrete electronic circuitry has been employed. No available integrated circuits could provide this high level of performance. GENERAL INSTRUCTIONS Use the Correct AC Voltage. Connecting the unit to an outlet supplying a higher voltage may create a fire hazard. Handle the Power Cord Gently Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, disconnect the plug from the AC outlet. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects upon it. Also do not make a knot in the power cord. Not only may the cord be damaged, it can also cause a short circuit with a consequent fire hazard. Place of Installation Place the unit on a firm and level surface. Avoid installing your unit under the following conditions: ■ Moist or humid places. ■ Places exposed to direct sunlight or close to heating equipment. ■ Extremely cold locations. ■ Places subject to excessive vibration or dust. ■ Poorly ventilated places. In Case of Moving the Unit Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect the interconnection cords with other units. Do Not Open the Cabinet To prevent shock hazard, do not tamper with internal components for inspection or maintenance. Harman Kardon does not guarantee against performance degradation resulting from any modification. If water, a hairpin or wire accidentally enters the unit, immediately extract the plug from the AC outlet to prevent shock and consult an authorized Harman Kardon service station. If you use the unit under this condition, it may cause a fire or shock hazard. Cleaning If the unit gets dirty, wipe it with a soft dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water and then with a dry cloth. Never use benzene, thinner, alcohol or other volatile agent, and avoid spraying an insecticide near the unit. The appliance conforms with EEC directive 87/308/EEC regarding interference suppression 1