Harman Kardon CITATION 7.1 Owners Manual - Page 12

Input and Bridging Connections The RCA jacks and bridging switches on the unit's rear panel are used to connect your surround processor or preamplifier to the amplifier, as well as to select the channel configuration. Once you have determined what the channel configuration will be, connect the output of your system to the amplifier as follows: Citation 7.0 Controller 000000 099• 992 0• 0000000 A '00000000 oo )€,ED OOOOOOOO. O,9 66,6 Citation 7.1 Amplifier Subwoofer Speakers 0'0' THU Citation 7.1 Amplifier Front Channel Speakers Citation 7.1 Amplifier -r 0 PUT Citation Dual Drive Dipoles Figure 2 System Connections 13 Note: Both switches should be in "Bridged" position - this is Twochannel operation mode. A jumper is used to connect both pairs of negative ("-) speaker terminals. Note: Switch between Ch. 1 dr Ch. 2 should be in 'Normal"position . Switch between Ch. 3 & Ch. 4 is in "Bridged" position - this is Threechannel mode. A jumper is used to connect the Ch. 3 & Ch. 4 speaker negative ("-") terminals. Note: Both switches should be in the "Normal" position - this is Fourchannel operation.