Harman Kardon FL 8385 Owners Manual - Page 14
Troubleshooting Guide, Programmed-play Operation - vibration
View all Harman Kardon FL 8385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PROGRAMMED-PLAY OPERATION Repeat All Discs To repeat all of the discs that have been loaded into the FL 8385, press the Repeat Button m three times so that the Repeat M, All Q and Disc N Indicators are lit. Press the Play Button g, (Play/Pause ) on the front panel) and the unit will play all tracks on all discs, starting with the disc that has been loaded in the play position. When all discs have played through, the sequence will repeat and the discs will continue to play until the Stop Button 9f is pressed. NOTES: • You may cancel a repeat function any time by pressing the Repeat Button m until the REPEAT Indicators MNOQ go out. The player will continue with normal play and then stop when the current disc is finished playing. • It is also possible to combine the Random and Repeat functions. Select the Random mode by pressing the Random Button h once, then press the Repeat Button m once to select a track on the current disc randomly, and to repeat that track until play is stopped. Press the Repeat Button m again to randomly play all of the tracks on the current disc, and then to repeat random play of the disc, but with the tracks selected in a different random order. In order to repeat random play of all discs or all discs sequentially, press the Random Button h again until the desired indicators (either Random A and Sequential B, or Random A, All Q and Disc N) are lit. TROUBLESHOOTING GUIDE SYMPTOM No lights on front panel Remote does not appear to operate POSSIBLE CAUSE • No AC power • Main Power Switch turned off • Weak batteries • Blocked sensor Front panel lights but CD does not play Play indicator lights but no sound is heard Sound skips or stutters during play Sound is continually distorted • Disc upside down • Moisture inside unit • Receiver or preamp and amp not turned on • Poor connections • Wrong source selected • Disc may be damaged • Surface vibrations • Incorrect input SOLUTION • Make certain that the AC power cord is plugged into a live outlet • Turn on Main Power Switch • Install fresh batteries, observing polarity indications • Remove obstructions from the front panel sensor, or connect a remote sensor to the Remote Control Input ¢ jack 0on the rear panel • Turn CD over so that label side faces up • Leave the unit turned ON for 30 minutes to allow moisture to evaporate • Turn on all necessary equipment • Make certain connections are secure and made to the correct (e.g., CD) input • Select CD source on receiver or preamp • Try another disc • Isolate the unit from vibration by placing it on a firm surface or move it further away from speakers • Make certain that the FL 8385 is connected to a line-level audio input, NOT a digital audio or phono input 14 TROUBLESHOOTING GUIDE