Harman Kardon FL 8385 Owners Manual - Page 8

REAR-PANEL CONNECTIONS ¡ AC Power Cord ™ Coaxial Digital Output £ Remote Control Output ¢ Remote Control Input ∞ Analog Audio Outputs NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. ¡ AC Power Cord: Connect this plug to an AC outlet. If the outlet is switch-controlled, make certain that the switch is in the ON position. ™ Coaxial Digital Output: Connect this jack to the coaxial-digital input of a digital audio/video receiver or an external digital-to-analog converter for direct access to the digital signals of the FL 8385. DO NOT connect this jack to the standard audio inputs of any device. £ Remote Control Output: Connect this jack to the input of another compatible Harman Kardon remote controlled device to have the remote sensor on the FL 8385 provide signals to other products. ¢ Remote Control Input: Connect the output of a remote infrared sensor or the remote control output of another compatible Harman Kardon product. This will enable the remote control system to operate even when the front panel Remote Sensor $ is blocked. It will also allow use of the FL 8385 with optional, external control systems. ∞ Analog Audio Outputs: Connect these jacks to the analog CD audio inputs of your receiver, surround processor or preamplifier. 8 REAR-PANEL CONNECTIONS