Harman Kardon MAS 102 Owners Manual - Page 12

MAS SYSTEM Operation 3. Press the Enter button to display "Alarm 1." Use the 7/3 buttons to display "Alarm 2." When the desired alarm is displayed, press the Enter button to set it. The "Weekday: On" message will appear. Use the 7/3 buttons to display the Weekday Time, Weekend On/Off, Weekend Time or Source Settings, and press the Enter button to make a change. You may adjust the Weekday, Weekend and Source settings for either alarm. Weekday On/Off: Select to adjust whether Alarm 1 or Alarm 2 will sound on weekdays. Use the 7/3 buttons to turn the setting On or Off. Press the Enter or Back button to save the change. Weekday Time: Select to set the Alarm 1 or Alarm 2 time for weekdays. The numeric time display will appear, with the hour setting flashing. Use the numeric keys to enter the two-digit hour setting, and the minute setting will flash. Use the numeric keys to enter the two-digit minute setting. Press the Enter button to advance from one field to the next without changing it, and press the Enter or Back button to save the change. Weekend On/Off: Select to adjust whether Alarm 1 or Alarm 2 will sound on weekends. Use the 7/3 buttons to turn the setting On or Off. Press the Enter or Back button to save the change. Weekend Time: Select to set the Alarm 1 or Alarm 2 time for weekends. The numeric time display will appear, with the hour setting flashing. Use the numeric keys to enter the two-digit hour setting, and the minute setting will flash. Use the numeric keys to enter the two-digit minute setting. Press the Enter button to advance from one field to the next without changing it, and press the Enter or Back button to save the change. Source: Select the source that will play when Alarm 1 or Alarm 2 sounds. The weekday and weekend alarms for each of Alarm 1 and Alarm 2 must use the same source. If you prefer different sources for weekdays and weekends, use Alarm 1 for weekdays only and Alarm 2 for weekends only by adjusting the Weekday On/Off and Weekend On/Off settings appropriately. t Use the 7/3 buttons to select one of these sources: Disc, USB A (front) or B (rear), Radio FM, Radio DAB (available only on MAS 111) or DMP (iPod docked in The Bridge IIIP when available). If Disc, DMP or USB A or B is selected, make sure a CD, iPod or USB is present and contains audio materials. If no device is present, the system will switch to FM Radio. Press the Enter or Back button to save the change. 4. You may adjust the duration of playback and the snooze control, as well as the volume level. These settings are global to both Alarm 1 and Alarm 2, and for both the weekday and weekend alarms. Alarm Timeout: With "Alarm 1" in the message display, press the 7/3 buttons until "Timeout" appears. This setting determines how long the system will play once the alarm sounds. t To change theTimeout setting,press the Enter button.Use the 7/3 buttons to change the duration of play: 10, 20, 30, 40, 50 or 60 minutes. Press the Enter or Back button to save the change. Snooze: With "Alarm 1" in the message display, press the 7/3 buttons until "Snooze" appears. When the Power button or the Sleep button is pressed while the alarm is playing, the alarm will turn off for the amount of time specified by the Snooze setting, and will then resume. ◆ To change the Snooze setting, press the Enter button. Use the 7/3 buttons to change how long play will be paused: 5, 10, 15, 20, 25 or 30 minutes. Press the Enter or Back button to save the change. Volume Level: With "Alarm 1" in the message display, press the 7/3 buttons until "Level" appears. This setting only affects playback using the alarms. ◆ To change the Level setting, press the Enter button. Use the 7/3 buttons to change the volume level within the range of - 80dB to +10dB. It is strongly recommended that you avoid using levels higher than 0dB to preserve your hearing and to avoid damage to the equipment. Before setting the alarm volume level, play the alarm source to determine a comfortable volume. Press the Enter or Back button to save the change. Figure 3: Setting the Alarms Settings Speaker Setup > Right Left Settings < Time Setup > Right Left Settings < Alarm Setup > Enter Back Right Alarm Setup Alarm 1 > Enter Back Alarm 1 Setup Weekday: On > Right Left Enter Enter or Back Weekday Alarm On > Alarm 1 Setup < Weekday Time > Right Left Enter Enter or Back Weekday Time < 07 : 15 > Alarm 1 Setup < Weekend: Off > Right Left Enter Enter or Back Weekend Alarm < Off Alarm 1 Setup < Weekend Time > Right Left Enter Enter or Back Weekend Time 10 : 00 Alarm 1 Setup < Source > Enter Enter or Back Alarm 1 Source Disc > Left Right < Alarm Setup Alarm 2 Enter Enter or Back Alarm 2 Setup Weekday: On > Right Left Enter Enter or Back Weekday Alarm On > Right Left Alarm 2 Setup < Weekday Time > Right Left Enter Enter or Back Weekday Time < 07 : 15 > Right Left Alarm 2 Setup < Weekend: Off > Right Left Enter Enter or Back Weekend Alarm < Off Alarm 2 Setup < Weekend Time > Right Left Enter Enter or Back Weekend Time 10 : 00 Alarm 2 Setup < Source Enter Enter or Back Alarm 2 Source Disc > Left Alarm Setup < Timeout > Right Left Enter Enter or Back Timeout 10 min > Alarm Setup < Snooze > Right Left Enter Enter or Back Snooze 05 min > Alarm Setup < Level Enter Level -55dB Enter or Back > 12