Harman Kardon MS 150 Owners Manual - Page 6
Remote Control Functions - ms 150
View all Harman Kardon MS 150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
MS 150 Remote Control Functions Standby: This button's function depends on the MS 150's on/Standby state: • When the MS 150 is on, pressing this button powers it down to the Standby mode (power is available only to the clock and alarm functions). • When the MS 150 is in the Standby mode, pressing this button toggles the display brightness between normal and dim. When you turn the MS 150 on, the display brightness will be at the new setting. NOTE: To power the MS 150 off completely, unplug the power supply from the AC outlet. Power On: Press this button to turn the MS 150 on. Skip/Scan Forward/Reverse: These buttons' functions depend on which source has been selected: • iPod/iPhone or CD: Press and release a button to skip to the next track or to the beginning of the current track. Press the reverse button twice to skip to the previous track. Press and hold a button to scan forward or in reverse within a track. • FM Radio: See Tuning on this page. Play/Pause/Memory: This button's function depends on which source has been selected: • iPod/iPhone or CD: Each press of the button toggles between the Play and Pause functions. Press and hold the button to stop playback fully. • FM Radio: If the currently tuned station has not been programmed into a preset, pressing the button stores the station as a preset. If all of the preset positions have been used, the "Full" message will appear, and you must erase an old preset before a new one can be stored. If the currently tuned station has previously been programmed as a preset, pressing the button for two seconds will erase the preset. Source Select: This button's function depends on the MS 150's on/Standby state: • When the MS 150 is on, each press of the button changes the current source in this order: FM, CD, AUX LINE IN 1 (rear-panel 3.5mm analog input), AUX LINE IN 2 (front panel), AUX LINE IN 3 (rear-panel dual RCA jacks), AUX DIGITAL IN, iPod/ iPhone. • When the MS 150 is in Standby mode, the SETTINGS menu is displayed in the Message Display. Use the / buttons to toggle between the ALARM VOLUME and EQ options. Use the / buttons within each option to change the setting. Press the Source button again to save your selection. Tuning Mode: When FM Radio is the selected source, each press of the button toggles between Auto and Manual tuning. Playback Mode: When iPod/iPhone or CD is the selected source, each press changes the repeat and random (shuffle) playback mode. See page 9 for the modes available with each source. When the MS 150 in the Standby mode or when the source is changed, the playback mode returns to Normal. Sleep: Each press increases the time until turn-off from 10 to 90 minutes, in increments of 10 minutes. The next press after the 90 minutes setting turns off the Sleep function. Clock Adjust Mode: With the MS 150 in the Standby mode, press this button to adjust the clock. Use the / Navigation buttons to adjust the hour, minute and 12/24 settings. To change between AM and PM, increase or decrease the hour. Press the / buttons to move the cursor to the previous or next position. Press this button again at any time when finished. Alarm Adjust Mode: With the MS 150 in Standby mode, press this button to adjust the alarm. Use the / Navigation buttons to adjust the hour, minute, 12/24 and wake-up source settings. To change between AM and PM, increase or decrease the hour. Press the / buttons to move the cursor to the previous or next position. Press this button again at any time when finished. Preset Search: When FM radio is the selected source, press this button to select the next or previous preset station, if any have been programmed. Eject: When a CD is loaded, press this button to eject it. Tuning: When FM radio is the selected source, press and release this button to tune to the next higher or lower station by one frequency increment. Press and hold this button to scan quickly through the stations. When you release the button, if Auto tuning mode is active, the radio continues to scan until it finds a station of acceptably strong signal quality, and then it stops. In Manual tuning mode, the radio stops immediately at the current frequency. Navigation buttons: These buttons are used with an iPod/iPhone to navigate its menus, or in Standby mode to adjust the clock or alarm. The / buttons are used for scrolling. Press the button to select the current item, and the button to display the menu or return to the previous menu screen. Mute: Press this button to silence the speakers temporarily. Press the button again to restore audio. Powering down the MS 150 to the Standby mode cancels the muting. Volume Controls: Momentarily press these buttons to increase or decrease the volume. Press and hold either button to change the volume more quickly. Standby Play/Pause/Memory Tuning Mode Source Select Clock Adjust Mode Sleep Preset Search STANDBY ON SOURCE TUNE PLAYBACK SLEEP CLOCK ADJ ALARM ADJ PR- EJECT PR+ TUNE- TUNE+ MUTE Power On Track-Skip/Scan/ Tuning Up/Down Playback Mode Alarm Adjust Mode Eject Tuning / / Navigation Mute Volume Controls VOLUME MMSS 110500 6