Harman Kardon PA 2000 Owners Manual - Page 5

Front Panel Controls and Indicators Power CH 1 Power Standby Protect CH 2 1 23 4 1 Power Switch 2 Power Indicators 3 Standby Indicators 4 Protect Indicators 1 Power Switch: Press this switch to turn the PA 2000 on for manual operation when the Power Control Mode Switch £ for one or both channel pairs is in the ON position, or to place it in the Standby mode when the Power Control Mode Switch £ for one or both channel pairs is in either the Music Sense or AC/DC Trigger position. 2 Power Indicators: These indicators will light when either of the channel pairs is on. 3 Standby Indicators: These indicators will light when AC mains power is applied to either of the channel pairs, but when that channel pair is not currently active. In this condition, the channel pair associated with the indicator is ready to turn on when a signal is applied to the Trigger Jack § or when there is an audio signal applied to the Input Jack ¡. 4 Protect Indicators: These indicators will light when either of the channel pairs is in the Protect mode. When one of these indicators lights, turn the unit off immediately and check for a problem, such as a short in the speaker wiring. 32 5 FRONT PANEL CONTROLS & INDICATORS