Hayward Pro Logic® Models: PL-PS-4 PL-PS-8 PL-PS-16 PL-PS-16V Installatio - Page 25

Configuration Setup - pro logic light control

Page 25 highlights

5. Configuration Setup After plumbing and wiring are complete, the Pro Logic MUST BE CONFIGURED before attempting to operate. Configuration information is entered at the keypad and "tells" the Pro Logic what equipment is connected and how each should be controlled. Group Function The latest version of the Pro Logic offers the ability to assign a Group function to a particular button. Instead of a button controlling one particular function, the button can be programmed to initiate a sequence of commands that are programmed in the Configuration Menu. For example, instead of the Lights button turning on and off the pool light only, the button can be programmed to turn on the pool light, turn on the bug light, turn off the pool cleaner, turn on and dim the patio lights, turn on the music, etc. all at the same time. This convenient feature is offered on all Aux buttons, both Valve buttons and the Lights button. The Pro Logic can be programmed to control up to four groups. Refer to this section when programming Group commands. Before assigning and configuring all the desired functions and their control parameters, the group itself must be configured. The options for controlling groups are Manual On/Off, Countdown Timer, and Timeclock. The group will turn on and off based on this selection. When setting up a Group function in the Configuration Menu, the first menu allows you to select the control parameter (how the group is activated and de-activated) and the second menu allows you to select which Pro Logic functions are to be controlled in the group. A table of functions and their corresponding control parameters are listed below. Function Pool/Spa Pool Filter Lights (standard relay) Lights (dimmer relay) Lights (VSP relay) Spa Filter Aux1-14 (standard relay) Aux1-14 (dimmer relay) Aux1-14 (VSP relay) Valve3 Valve4 Spa Htr1 Set Pool Htr1 Set Spa Htr2 Set Pool Htr2 Set Spa Solar Set Pool Solar Set SuperChlr Control Parameter Unaffected, Pool only, Spa only, or Spillover Unaffected, Off, On, High, Low, On (Lowest to Highest) Unaffected, Off, or On Unaffected, Off, On (100%, 80%, 60%, 40%, or 20%) Unaffected, Off or On (10% to 100%) Unaffected, Off, On, High, Low, On (Lowest to Highest) Unaffected, Off or On Unaffected, Off, On (100%, 80%, 60%, 40%, or 20%) Unaffected, Off or On (10% to 100%) Unaffected, Off or On Unaffected, Off or On Unaffected, Off, 65º-104ºF Unaffected, Off, 65º-104ºF Unaffected, Off, 65º-104ºF Unaffected, Off, 65º-104ºF Unaffected, Off, 65º-104ºF Unaffected, Off, 65º-104ºF Unaffected, Off, On 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

5.
Configuration Setup
After plumbing and wiring are complete, the Pro Logic MUST BE CONFIGURED before attempting to operate.
Configuration information is entered at the keypad and “tells” the Pro Logic what equipment is connected and how
each should be controlled.
Group Function
The latest version of the Pro Logic offers the ability to assign a Group function to a particular button.
Instead of a
button controlling one particular function, the button can be programmed to initiate a sequence of commands that
are programmed in the Configuration Menu.
For example, instead of the Lights button turning on and off the pool
light only, the button can be programmed to turn on the pool light, turn on the bug light, turn off the pool cleaner, turn
on and dim the patio lights, turn on the music, etc. all at the same time.
This convenient feature is offered on all Aux
buttons, both Valve buttons and the Lights button. The Pro Logic can be programmed to control up to four groups.
Refer to this section when programming Group commands.
Before assigning and configuring all the desired functions and their control parameters, the group itself must be
configured.
The options for controlling groups are Manual On/Off, Countdown Timer, and Timeclock. The group
will turn on and off based on this selection.
When setting up a Group function in the Configuration Menu, the first menu allows you to select the control
parameter (how the group is activated and de-activated) and the second menu allows you to select which Pro
Logic functions are to be controlled in the group.
A table of functions and their corresponding control parameters are listed below.
22
Pool/Spa
Unaffected, Pool only, Spa only, or Spillover
Pool Filter
or
Function
Control Parameter
Unaffected, Off, On, High, Low, On (Lowest to Highest)
Lights
Unaffected, Off, or On
Lights
Unaffected, Off, On (100%, 80%, 60%, 40%, or 20%)
Lights
Unaffected, Off or On (10% to 100%)
Spa Filter
Unaffected, Off, On, High, Low, On (Lowest to Highest)
Aux1-14
Unaffected, Off
On
Aux1-14
Unaffected, Off, On (100%, 80%, 60%, 40%, or 20%)
Aux1-14
Unaffected, Off or On (10% to 100%)
Valve3
Unaffected, Off or On
Valve4
Unaffected, Off or On
Spa Htr1 Set
Unaffected, Off, 65º-104ºF
Pool Htr1 Set
Unaffected, Off, 65º-104ºF
Spa Htr2 Set
Unaffected, Off, 65º-104ºF
Pool Htr2 Set
Unaffected, Off, 65º-104ºF
Spa Solar Set
Unaffected, Off, 65º-104ºF
Pool Solar Set
Unaffected, Off, 65º-104ºF
SuperChlr
Unaffected, Off, On
(standard relay)
(dimmer relay)
(VSP relay)
(s
(dimmer relay)
(VSP relay)
tandard relay)