HealthRider H25x Bike English Manual - Page 10

Slide the Front Shield Cover 7 downward

Get HealthRider H25x Bike PDF manuals and user guides View all HealthRider H25x Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

8. Slide the Front Shield Cover (7) upward onto the Upright (4). 8 While another person holds the Upright (4) near the Frame (1), connect the Extension Wire (59) to the Wire Harness (58). Insert the Upright (4) into the Frame (1). Tip: Avoid pinching the wires. Attach the Upright (4) with four M8 x 20mm Patch Screws (74) and four M8 Split Washers (75). Slide the Front Shield Cover (7) downward to the Frame (1) and press it into place. Avoid pinching 4 the wires 7 75 1 74 59 58 75 74 75 9. Identify the Right Pedal (21), which is marked with an "R." 9 Using an adjustable wrench, firmly tighten the Right Pedal (21) clockwise into the Right Crank Arm (19). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown). IMPORTANT: Tighten both pedals as firmly as possible. After using the exercise cycle for one week, retighten the pedals. For best performance, keep the pedals tightened. Adjust the strap on the Right Pedal (21) to the desired position, and press the ends of the straps onto the tabs on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 19 Strap 21 Tab 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
10
8
9
75
75
75
74
74
58
59
8.
Slide the Front Shield Cover (7) upward onto
the Upright (4).
While another person holds the Upright (4) near
the Frame (1), connect the Extension Wire (59)
to the Wire Harness (58).
Insert the Upright (4) into the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (4) with four M8 x 20mm Patch Screws
(74) and four M8 Split Washers (75).
Slide the Front Shield Cover (7) downward to
the Frame (1) and press it into place.
4
7
1
Avoid pinching
the wires
9.
Identify the Right Pedal (21), which is marked
with an “R.”
Using an adjustable wrench,
firmly tighten
the
Right Pedal (21)
clockwise
into the Right Crank
Arm (19).
Tighten the Left Pedal (not shown)
counter-
clockwise
into the Left Crank Arm (not shown).
IMPORTANT: Tighten both pedals as firmly
as possible. After using the exercise cycle
for one week, retighten the pedals. For best
performance, keep the pedals tightened.
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
straps onto the tabs on the Right Pedal.
Adjust
the strap on the Left Pedal (not shown) in
the same way.
19
Strap
Tab
21