HealthRider H25x Bike English Manual - Page 8
Tip: Avoid pinching the Extension Wire 59.
View all HealthRider H25x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Apply some of the included grease to an M6 x 70mm Bolt Set (50). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar. Tip: Avoid pinching the Extension Wire (59). Attach the Handlebar (5) to the Upright (4) with the M6 x 70mm Bolt Set (50) and two M8 Washers (43). Then, attach an M6 x 60mm Bolt Set (51) through the lower bracket on the Handlebar (5). 5 51 59 50 43 5 Grease 43 50 51 4 Avoid pinching the Extension Wire (59) 6. While another person holds the Console (13) near the Handlebar (5), connect the console wires to the Extension Wire (59), the Pulse Wire (61), the Left Controller Wire (66), and the Right Controller Wire (67). Look at the tags on the wires and make sure that the Left and Right Game Wires are connected to the correct wires on the console. Insert the excess wire downward into the Handlebar (5) or upward into the Console (13). Tip: Avoid pinching the wires. Attach the Console (13) to the Handlebar (5) with four M4 x 16mm Screws (90). 6 Avoid pinching the wires Console Wires 59 61 5 13 66 67 90 8