HealthRider H35e Elliptical Enc Manual - Page 8
start all six Screws, and then tighten, them., Tip: Secure the Main Wire 32 to the Upright
View all HealthRider H35e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. With the help of a second person, place some of the packing materials (not shown) under the rear 3 of the Frame (1). Attach the Track (11) to the Frame (1) with four M10 x 20mm Screws (74), two M10 x 38mm Screws (75), and six M10 Washers (64) as shown; start all six Screws, and then tighten them. Then, remove the packing materials from under the Frame (1). 74 64 1 74 11 74 64 75 4. Have a second person hold the Upright (2) near the Frame (1). 4 Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Main Wire (32). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: Secure the Main Wire (32) to the Upright (2) with the wire tie to prevent it from falling into the Upright. Wire Tie 2 Wire Tie 32 1 8