HealthRider H35e Elliptical Enc Manual - Page 9
Tip: Avoid pinching the Main Wire 32., the Main Wire
View all HealthRider H35e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Tip: Avoid pinching the Main Wire (32). Slide the Upright (2) onto the Frame (1). 5 Attach the Upright (2) with an M10 x 53mm Screw (73), an M10 x 20mm Screw (74), two M10 Split Washers (80), and two M10 Curved Washers (62) as shown; do not fully tighten the Screws yet. Finish attaching the Upright (2) with an M10 x 60mm Bolt (72) and an M10 Locknut (77); do not fully tighten the Bolt yet. Make sure that the Locknut is in the hexagonal hole. Avoid pinching the Main Wire (32) 72 62 80 74 2 73 62 80 Hexagonal Hole 77 32 1 6. Insert the Upright Axle (18) into the Upright (2) and center it. 6 Using a plastic bag to keep your fingers clean, apply some of the included grease to both ends of the Upright Axle (18). Grease 2 18 Grease 9
9
5
2
1
72
74
73
77
80
80
62
Hexagonal Hole
62
32
6
5.
Tip: Avoid pinching the Main Wire (32).
Slide
the Upright (2) onto the Frame (1).
Attach the Upright (2) with an M10 x 53mm
Screw (73), an M10 x 20mm Screw (74), two
M10 Split Washers (80), and two M10 Curved
Washers (62) as shown;
do not fully tighten
the Screws yet.
Finish attaching the Upright (2) with an
M10 x 60mm Bolt (72) and an M10 Locknut (77);
do not fully tighten the Bolt yet. Make sure
that the Locknut is in the hexagonal hole.
Grease
Grease
18
2
Avoid pinching
the Main Wire
(32)
6.
Insert the Upright Axle (18) into the Upright (2)
and center it.
Using a plastic bag to keep your fingers clean,
apply some of the included grease to both ends
of the Upright Axle (18).