HealthRider S700i English Manual - Page 27
sensor does not func
View all HealthRider S700i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
PROBLEM SOLUTION 7. The handgrip pulse sensor does not function properly a. Make sure to stand on the foot rails and avoid moving your hands while measuring your heart rate. Excessive movement may interfere with heart rate readings. If the handgrip pulse sensor is not used correctly, your heart rate will not be shown. b. Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. c. For the most accurate heart rate reading, hold the contacts for about 15 seconds. d. For optimal performance of the handgrip pulse sensor, keep the contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals. 8. The chest pulse sensor does not function properly a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLE-SHOOTING on page 6. b. If the chest pulse sensor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise to the ÒopenÓ position. Remove the cover. Battery Cover Remove the old battery from the sensor unit. Insert a new CR 2032 battery, making sure that the writing is on top. In addition, make sure that the rubber gasket is in place in the sensor unit. Replace the battery cover and turn it to the closed position. Battery Cover Battery Rubber Gasket 27