HP 1035nr HP Mini 1000 NetBook - Maintenance and Service Guide - Page 55
Heat sink assembly, Hard drive or solid-state drive see
UPC - 884420578406
View all HP 1035nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Heat sink assembly Description Heat sink assembly Spare part number 515099-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the following components: a. Keyboard (see Keyboard on page 33) b. Hard drive or solid-state drive (see Mass storage devices on page 35) c. Top cover (see Top cover on page 37) d. WLAN module (see WLAN module on page 40) Remove the heat sink assembly: 1. Remove the two silver Phillips PM1.6×2.5 screws that secure the heat sink assembly to the system board (1). 2. Remove the heat sink assembly (2). Reverse this procedure to install the heat sink assembly. Component replacement procedures 47