HP 1035nr HP Mini 1000 NetBook - Maintenance and Service Guide - Page 60
disconnect the webcam module cable from the display enclosure, Release the ZIF connector
UPC - 884420578406
View all HP 1035nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5. If it is necessary to replace the display bezel (8.9-inch panel only), flex the inside edges of the bottom (1), left and right sides (2), and the top (3) of the display bezel until the bezel disengages from the display enclosure, and then remove the display bezel (4). The display bezel, spare part number 506333-001, is for use with 8.9-inch panel only. 6. If it is necessary to replace the webcam module, perform the following steps: a. Open the tab built into the display enclosure shielding that secures the microphone cable, and then release the microphone from its clip (1). b. Release the ZIF connector (2) to which the webcam module cable is attached, and then disconnect the webcam module cable from the display enclosure (3). The microphone and webcam module cables (for 8.9-inch panels only) are available in the Display Cable Kit, spare part number 504597-001. 52 Chapter 4 Removal and replacement procedures