HP 158223-B21 HP StorageWorks SAN Switch Rack Mount Kit Installation Instructi - Page 14
Table 1
![]() |
UPC - 720591237448
View all HP 158223-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
- For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 6. Figure 6: Assembling the outer rails (HP System/e rack) 5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with thread lock required to assemble the inner rails by referring to Table 1. Table 1: Number of screws required to assemble the inner rails Switch SAN Switch 2/32 SAN Switch 2/16 SAN Switch 2/8 Number of #8-32 x 3/16-inch Screws 12 10 14 14 SAN Switch Rack Mount Kit Installation Instructions
![](/manual_guide/products/hewlettpackard-158223b21-hp-storageworks-san-switch-rack-mount-kit-installation-instructions-avru6ybte-2003-c5cbbc7/14.png)