HP 158223-B21 HP StorageWorks SAN Switch Rack Mount Kit Installation Instructi - Page 15
For the SAN Switch 2/32 and SAN Switch 2/16, perform, For the SAN, Switch 2/8, perform
UPC - 720591237448
View all HP 158223-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6. For the SAN Switch 2/32 and SAN Switch 2/16, perform step a. For the SAN Switch 2/8, perform step b. Caution: Do not use any other screws other than the fourteen that are provided. Use of any longer lengths can cause damage to internal components. Note: The inner rails work for all three SAN switches-SAN Switch 2/32, SAN Switch 2/16, and SAN Switch 2/8. The mounting holes in the inner rails are marked with 32, 16, and 8. Use the appropriately labeled mounting holes when installing the inner rails on a switch. For example, to install the inner rails on the SAN Switch 2/32, use the mounting holes labeled with 32. When viewing a rack from the front, the left rails are used in the left side of the rack and the right rails are used in the right side of the rack. The rails must match up-right inner with right outer and left inner with left outer. Note that the SAN switch mounts in the rack with its front, the port side, facing the back of the rack. The rear of the switch, the AC side, faces the front of the rack. SAN Switch Rack Mount Kit Installation Instructions 15