HP 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 753
To display details on the FDCB specified in the, argument, which was derived from the previous
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 753 highlights
portShow 2 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 9 Uptime 23 hours, 19 minutes, 45 seconds Streaming TCP vars: head index = 24 tail index = 24 Current Count = 0 Pending Frames High = 16 Segment Count High = 3 Data Mover Restarts = 0 Data Mover Desc Full = 0 Frame Too Large Count = 0 Max Reference Count = 15 Max Frame Size = 2116 Max Segments Pulled = 0 Reached Max Pending Frames = 0 FCIP Smoothed RTT = 202 ms FCIP RTT Variance = 1 ms FC control traffic TCP connection: Local 192.168.32.1:4129, Remote 192.168.32.2:3225 Data transfer TCP connection: Local 192.168.32.1:4130, Remote 192.168.32.2:3226 To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 1 -epcb -clear To display a list of discovered devices and selected path and status information on each. Get the adrs from this display for the next command: switch:admin> portshow ficon ge0 all -fdcb To display details on the FDCB specified in the adrs argument, which was derived from the previous example: switch:admin> portshow ficon ge0 all -fdcb 10008000 To display the same information as the previous example but with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 all -fdcb 10008000 -clear To display the inband management interfaces configured on the Brocade 7500: switch:admin> portshow inbandmgmt ge1 Port: ge1 Inband Management: Enabled CP Interface IP Address NetMask MTU 0 192.168.255.1 255.255.255.252 1500 GE Interface IP Address NetMask MTU 0 192.168.255.2 255.255.255.252 1500 Fabric OS Command Reference 723 53-1001337-01