HP 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 84
To set the device authentication policy to on mode, To set the Device policy to passive mode
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2 authUtil See Also To set the Device policy to passive mode: switch:admin> authutil --policy -dev passive Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authentication is set to PASSIVE To set the device authentication policy to "on" mode: switch:admin> authutil --policy -dev on Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authenticaiton is set to ON 2008/03/24-23:13:06, [AUTH-1003], 112,, INFO, Stealth_3, Device authentication type has been successfully set to ON To start authentication on E/F_Ports 2, 3, and 4: switch:admin> authutil --authinit 2,3,4 To disable md5 hash type for FIPS configuration: switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1,md5 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF switch:admin> authutil --set -h sha1 Hash is set to sha1. switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF portShow, secAuthSecret 54 Fabric OS Command Reference 53-1001337-01