HP 1606 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 632

90 SEC-1328 Probable Cause Indicates the policy is conflicting with the domain. Recommended Action No action is required. The domain is denied by disallowing all its E_ports connected to the fabric. If the domain should be allowed to merge with the fabric, then resolve the issue by making the conflicting policies the same. Severity WARNING SEC-1328 Message , [SEC-1328], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates the secModeEnable command failed on the fabric because Authentication Policy is enabled on the switch. Recommended Verify the security event was planned. If the security event was planned, run the authUtil --policy Action passive command to disable the Authentication Policy and retry the secModeEnable command. Severity ERROR SEC-1329 Message , [SEC-1329], ,, ERROR, , IPFilter enforcement: Failed to enforce ipfilter policy of type because of . Probable Cause Indicates the IP filter policy enforcement failed due to internal system failure. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1330 Message , [SEC-1330], ,, ERROR, , command failed - db(s) are coming from a non-Primary switch. Probable Cause Indicates an attempt was made to distribute databases either from a backup fabric configuration server (FCS) switch or from a non-FCS switch. Recommended Verify the distribution is initiated by the primary FCS switch. Use the secPolicyShow command to Action verify and correct the configuration if necessary. Severity ERROR 556 Fabric OS Message Reference 53-1001767-01