HP 1606 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 268
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7, bypass 8 Do not use.
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
8 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 • unavailable (1) Do not use. • online (2) Available for meaningful work. • offline (3) Not available for meaningful work. • bypassed (4) No longer used. • diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.) For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing, faulted). connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 Values An overall protocol status for the port. For a U_Port, the status should be ols (9). Possible values are: • unknown (1) • unused (2) Device cannot report this status. • ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed. • warning (4) Do not use. • failure (5) Port is faulty. • notparticipating (6) Loop not participating and does not have a loop address. Do not use. • initializing (7) Protocol is proceeding. Do not use. • bypass (8) Do not use. • ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.) NOTE In Fabric OS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2 (unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty. In Fabric OS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the value is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown portype and offline port state, the value is 1 (unknown). connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 Values The technology of the port transceiver. Possible values are: • unknown (1) • other (2) • unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) 250 Fabric OS MIB Reference 53-1001768-01