HP 3330mfp HP LaserJet 3300mfp Series - (English) Getting Started Guide - Page 13

Network connection requirements If you purchased an HP LaserJet 3320n and want to connect the product to a network using the HP Jetdirect 310x print server included with the product, use the instructions in this guide. If you purchased an HP LaserJet 3300 series product other than the HP LaserJet 3320n and want to connect the product to a network, you must use a supported HP Jetdirect print server and follow the procedure described in "To use a supported HP Jetdirect print server" on page 10. Your choice of print server depends on the type of network connection you have and the number of devices you want to connect to the print server. The following print servers are supported by HP LaserJet 3300 series products and are available from your local HP dealer or at http://www.buy.hp.com. Model HP Jetdirect 170x Product number J3258B HP Jetdirect 175x J6035A HP Jetdirect 300x J3263A HP Jetdirect 310x J6038A HP Jetdirect 500x J3264A HP Jetdirect 500x J3265A Print server use Firmware version number 10Base-T network connection All (connects one product to a network) 10Base-T or 100Base-Tx network All connection (connects one product to a network) 10Base-T or 100Base-Tx network connection (connects one product to a network) H.08.00 or higher 10Base-T or 100Base-Tx network All connection (included with HP LaserJet 3320n products - connects one product to a network) Token Ring network connection (connects the product and up to two other devices to a network) J.08.00 or higher Note: The product is supported only on Port 1 of this print server. BNC, 10Base-T, or 100Base-Tx network connection (connects the product and up to two other devices to a network) J.08.00 or higher Note: The product is supported only on Port 1 of this print server. ENWW Network connection requirements 9