HP 3380 HP LaserJet 3015, 3030, and 3380 All-in-One - (English/French) Fax Gui - Page 43
Setting the answer mode, To set the answer mode, Automatic, Manual, Fax setup, Fax Recv. setup - user manual
View all HP 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
English Setting the answer mode Note Depending on your situation, you can set the device answer mode to Automatic or Manual. The factory-set default is Automatic. ● Automatic: In this answer mode, the device answers incoming calls after a specified number of rings or upon recognition of special fax tones. To specify the number of rings, see Changing the rings-to-answer setting. ● Manual: In this answer mode, the device never answers calls. You must start the faxreceiving process yourself, either by pressing FAX/SEND on the control panel or by picking up a telephone that is connected to that line and dialing 1-2-3 (in tone-dial mode only). Although most users leave the answer mode set to Automatic, voice callers who dial the fax telephone number will hear fax tones if the telephone is not answered, or if they do not hang up by the specified number of rings-to-answer. If you do not want voice callers to hear fax tones, use the Manual setting. But remember that fax calls are not received automatically when the mode is set to Manual. To set the answer mode To set or change the answer mode, complete the following steps: 1. On the control panel, press MENU/ENTER. 2. Use the < or the > button to select Fax setup, and then press MENU/ENTER. 3. Use the < or the > button to select Fax Recv. setup, and then press MENU/ENTER. 4. Press MENU/ENTER to select Answer mode. 5. Use the < or the > button to select Automatic or Manual, and then press MENU/ENTER. The control panel display shows the answer mode setting that you specified. ENWW Setting the answer mode 41