HP 353803-B22 HP StorageWorks Modular Smart Array FC VDS Provider for Windows - Page 5

3. Go to the Windows Task Manager and end the hpmsafcvds task. (Right click the Windows Taskbar, and select Task Manager. Click the Processes tab, click the hpmsafcvds task, click End Process, and close the Task Manager.) 4. Restart the client application. • The delete lun command is supported, but only the last logical drive of an array can be deleted. VDS does not recognize the concept of arrays, so it is not readily apparent which LUN can be deleted. • The hardware provider does not allow simultaneous extension of size with a list of disks. For example the following command is invalid: extend lun drives=5,6 size=111mb. Use only one option at a time. Also, the hardware provider will not automatically extend a LUN to its maximum size when specifying a drive list. • The only Automagic set parameters supported are FTL, MXD, and STS. When using the STS parameter, you must select one of the available stripe sizes. To list stripe sizes, use the detail subsytem command. • The maintenance command supports only blinking. Other maintenance options are not supported, such as SPINUP, SPINDOWN, BEEP, and PING. • The HP MSA FC VDS hardware provider supports HP MPIO Full-Featured DSM for MSA Active-Active configurations. For MSA Active-Passive configurations, the HP MSA FC VDS hardware provider supports only HP MPIO Basic DSM, and you must use MPIO management software to manage MPIO. Determining current version To determine your current version of HP MSA HWP software: 1. Select Windows Start > Settings > Control Panel, and select Add or Remove Programs. 2. Click HP VDS. 3. Click Support Information. Supersedes history None Effective date February 2007 HP StorageWorks Modular Smart Array FC VDS Hardware Provider for Windows 2003 release notes 5