HP 381513-B21 HP Smart Array Controllers for HP Integrity Servers User Guide - Page 30

Install the cache module and batteries on the controller board., module in its place

Get HP 381513-B21 - Smart Array P800 Controller RAID PDF manuals and user guides
UPC - 882780622029
View all HP 381513-B21 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

6. Slide the battery assembly and the cache module off the controller board (2). The procedure at this point depends on whether you are replacing the controller or the cache module. o If you are replacing the controller, go directly to the next step. o If you are replacing the cache module, pull it out of the battery assembly, install the new cache module in its place, and then go to the next step. 7. Install the cache module and batteries on the controller board. a. Hold the controller board near the DIMM connector and at the top and right edges to minimize bending of the board. b. Position the batteries so that the pegs A on the underside of each battery are in the appropriate holes B on the controller board, and pegs C are in slots D. Upgrading or replacing controller options 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
Upgrading or replacing controller options
30
6.
Slide the battery assembly and the cache module off the controller board (2).
The procedure at this point depends on whether you are replacing the controller or the cache
module.
o
If you are replacing the controller, go directly to the next step.
o
If you are replacing the cache module, pull it out of the battery assembly, install the new cache
module in its place, and then go to the next step.
7.
Install the cache module and batteries on the controller board.
a.
Hold the controller board near the DIMM connector and at the top and right edges to minimize
bending of the board.
b.
Position the batteries so that the pegs A on the underside of each battery are in the appropriate
holes B on the controller board, and pegs C are in slots D.