HP 3PAR StoreServ 7400 2-node HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3.
HP 3PAR StoreServ 7400 2-node Manual
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7400 2-node manual content summary:
- HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 1
HP 3PAR-to-3PAR Storage Peer Motion Guide HP Part Number: QL226-97008 Published: June 2013 - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 2
L.P. Confidential computer software. Valid license from HP required for possession, use or copying. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 3
1 Overview of HP 3PAR-to-3PAR Storage Peer Motion 5 About Peer Motion ...5 How Peer Motion Works...5 Migration Types...5 Online Migration Procedure 6 Offline Migration Procedure 6 Minimally Disruptive Migration Procedure 7 2 Preparing for Data Migration 8 System Requirements...8 Network and - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 4
Storage Systems 51 4 Post-Migration Tasks 53 System Post-Migration Tasks...53 Fabric Topology Post-Migration Tasks 53 Volume Post-Migration Tasks...53 Remote Copy Post-Migration Tasks 53 5 Troubleshooting HP 3PAR-to-3PAR Data Migration 54 6 Support and Other Resources 55 Contacting HP...55 HP - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 5
supported when the destination system is running HP 3PAR OS 3.1.2 or a later version. If you are running HP 3PAR OS 3.1.1, refer to the HP 3PAR Peer Motion Manager 1.1.0 Software User's Guide completely copied the data on a volume to local storage, it stops mirroring writes to Source1 for that volume - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 6
systems together. 3. Launch the Create PM Configuration wizard to set up the source and destination systems. 4. Launch the Copy Storage Settings and Configurations wizard to copy the settings and configurations from the source system to the destination system. 6 Overview of HP 3PAR-to-3PAR Storage - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 7
system. 6. Launch the Data Migration wizard to perform volume migration from the source system to the destination system. nodes should be shut down. When migrating all other Windows clusters (refer to the support matrix for the supported releases), simply shut down all of the cluster nodes - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 8
that the virtual volume blocking operation will fail and cause a volume import task failure. • Wild cards are not supported. • Virtual volume sets and patterns are not supported. • For HP-UX and AIX, the destination system must be running HP 3PAR OS 3.1.2 MU2 or later. 8 Preparing for Data Migration - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 9
must use the same IP protocol version. Version IPv6 is not supported. • The ports should be zoned 1:1 across the fabric. If nodes 0 + 1 are used on the source system and nodes 0 + 1 are used on the destination system, the ports on source-0 and destination-0 should be zoned together. The ports source - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 10
. E-class and S-class systems can only be source systems, because they cannot run HP 3PAR OS 3.1.1 or 3.1.2. • Remote Copy groups and their synchronization tasks that exist on the source system are not created by Peer Motion on the destination system; this has to be done manually. • Only point (also - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 11
system data if the source system is not an HP 3PAR Storage System. • You must connect to both systems to perform most of the Peer Motion Manager operations. • EVA-to-3PAR data migration is not supported. For more information about , see the HP EVA to 3PAR StoreServ Online Import Migration Guide - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 12
Configuration wizard, the following conditions are required: • Storage systems must meet all the requirements in the HP 3PAR-to-3PAR Data Migration Guide (http://www.hp.com). • Super user role. • At least one available source system and destination system that are not in a Peer Motion configuration - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 13
. If you attempt to create a peer motion configuration between an encrypted source system and a non-encrypted destination system, a warning dialog appears indicating data migrated to the non-encrypted system is no longer be protected by encryption. Click Yes to create the configuration, or click - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 14
Click Yes to continue. The Port Configuration and Zoning dialog box appears. Show Port WWNs This dialog box displays the source system's system host port WWNs and the destination systems' peer port WWNs. Use this information to zone the peer ports to the host ports. 14 Using the Peer Motion Manager - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 15
Port Configuration and Zoning After zoning is complete, click OK, and click Verify Configuration when your are returned to the Set Up Connections screen. If the configuration is successful, a message to that effect is displayed. If the configuration was not successful, a message that describes the - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 16
not be displayed. NOTE: • Copying the NTP configuration is supported only when you are configuring HP 3PAR Storage Systems. • Syslog parameters are copied from the source system to the destination system, but the HP 3PAR Management Console has no syslog parameters management functionality. • The - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 17
3.1.2 and higher) • SNMP • Syslog parameters To copy storage settings and configurations from the source system to the destination system: 1. To copy storage settings, select the Copy all listed storage settings checkbox. 2. Select each storage configuration you want to copy, if enabled. 3. Click - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 18
to the destination system using the Copy Storage Settings and Configurations wizard. • Determine the best time to do the data migration. (A period of low usage is best, as migration incurs I/O latency.) The Migrate Data wizard guides you in migrating volumes from the source system to the destination - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 19
or minimally disruptive migration, select the Host, Host Set, or Linked Hosts for which you want to migrate virtual volumes to the destination system. NOTE: All virtual volumes exported to overlapping hosts (Linked Hosts) must be exported. For example: VV1 is exported to Host1, VV2 is exported - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 20
the text box. 5. If not already selected, select the virtual volumes in the 1. Select the virtual volumes to be configured during import to window, then click Add. (You can also add the virtual volumes one at a time.) 6. If you are using offline migration, click Finish to create - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 21
status is Normal. • There are admitted (peer) volumes to be imported and no importing volumes. This wizard guides you in importing peer volumes to the destination system. The types of migration are Online, Minimally Disruptive, and Offline. The wizard automatically selects a migration type Importing - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 22
. The Import Volume wizard appears. See also: "Create Peer Volumes" (page 18) Select Peer Volumes 1. The type of migration is preselected based on the system set up and the settings you configured in the Create PM Configuration wizard. 2. For Online or Minimally Disruptive Migration, select the Host - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 23
Peer Volumes command does not display volumes in the Importing state because they cannot be removed. Any importing volumes that fail are removed by the system manager. NOTE: Do not remove peer volumes unless the migration process is not successful. If you remove peer volumes which have not yet been - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 24
To remove peer volumes: 1. Select Peer Motion in the Manger Pane. 2. In the Common Actions panel, click Remove Peer Volumes. The Remove Peer Volumes dialog box appears. 3. Select the Select to also delete check box if you want to delete any listed volumes currently exported to a host and listed - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 25
Motion Configuration This feature enables you to remove the Peer Motion configuration. It also removes the migration host, if one exists on the source system. You can keep peer ports for later use or change them to host ports. The following conditions are required to use the Remove PM Configuration - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 26
PM Configuration dialog box that appears depends on whether the migration host exists on the source system.) The following shows the Remove PM Configuration dialog if the migration host exists on the source system: The following shows the Remove PM Configuration dialog if the migration host does not - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 27
a Peer Motion Configuration To view the current Peer Motion configuration: 1. Select a storage system in the Management Tree. 2. Select Peer Motion in the Manager Pane. The Peer Motion Configuration tree node appears. 3. The Peer Motion Configuration window contains a Summary tab, a Tasks tab - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 28
, Degraded, or Failed. The Peer Motion ports associated with each system. The Peer Motion connection status, which can be one of the following: • Normal • Incorrect number of Peer Motion paths • Peer Motion ports are not on adjacent nodes • Peer Motion port modes are not point-to-point • Source - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 29
it took to complete the task. The detail pane displays the following information: Group General Field System Name System SN ID Type Status Description The name of the system on which the task was started. The system's serial number. The task ID. The task type. Indicates whether a task is Running - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 30
information: Group General Component Frequency Field Severity Type Message ID State Message Code Sequence System System SN Node ID Component Repeat Count Last Time First Time Description The severity of the problem. The type of alert. Text message describing the reason for the alert. The task - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 31
destination systems, the host and peer ports, and the ports connectivity. The list pane provides the following information: Column Position Label WWN/MAC State Type Connection Mode Connected Device Type Connected Device Mode Partner Partner WWN Failover State Description The port location in Node - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 32
system automatically selects the rate. Max Rate Maximum rate of connection from the port. Class 2 Indicates whether Fibre Channel service no notification is sent. Unique Node WWN Indicates whether the node's WWN is Enabled or Disabled. When supported by the network, an MTU value of 9000 should - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 33
ports not shown) Primary IP Address TCP Port Primary Internet Storage Name Service server IP address. iSNS protocol allows for automated discovery, management name of the host system. The domain the host is associated with (if any). The WWN of the port. The port location in Node:Slot:Port format. - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 34
& Domains. Hosts Node When the Hosts node is selected in the Peer Motion tree, a Hosts tab and a Host Sets tab is displayed in the Management Window. Storage Settings and Configuration Hosts Screen The Hosts screen displays source hosts and destination hosts side by side. The source system must be - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 35
). User-created comments. Security & Domains Node The Security & Domains screen displays the security settings of the source and destination systems. It includes Summary, Users, Domains, Domain Sets, and LDAP tabs. Security & Domains Node Summary Tab Viewing Storage Settings and Configurations 35 - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 36
Field Users LDAP configuration Domains Domain Sets Global/Domain Browse Create Edit Super Service Inside Domain Size Outside Domain Size Total Size Domain Size Description The number of users on the system. Whether the system is configured for LDAP authentication. The number of domains on the - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 37
Node Domain Sets Tab NOTE: This tab is hidden if the source and destination systems do not have a domain license or do not support the Node LDAP Tab The Security & Domains Node LDAP tab displays all LDAP properties and their associated values for both Source and Destination systems. Viewing Storage - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 38
tree. The Management window displays the available, admitted (peer), importing, and imported hosts and virtual volumes for the migration host system, along with capacity information for volumes in imported and importing states. Selecting a highlighted item takes you to the corresponding screen - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 39
Exported Total Exported Size Description The name of a host on the source system. The domain (if any) of which the host is a member. The number of host ports on the system. The number of storage system ports. The port node IDs. The persona information for the specified port (for example, 1-Generic - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 40
Hosts Total Reserved Size Total Exported Size Comments Description The name of a host set on the source system. The domain (If any) to which the host set belongs. The number of host on the system. The total amount of reserved space (in GiB). The total size (in GiB) of the exported volumes - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 41
disruptive. The detail pane provides Summary, Active VLUNs, and Virtual Volume information for both the source and destination hosts. (The source system must be connected for the source information to be displayed.) Admitted/Importing Host Sets Screen The Admitted Host Sets screen displays host - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 42
a Virtual Volumes tab. Available/Imported Volumes Screen The Available Volumes screen displays the volumes that are visible to the source and destination storage system but that have not yet been admitted. The Imported Volumes screen displays the volumes that have been imported to the destination - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 43
Volumes screen, the I/O endpoint is indicated by a green arrow. The summary screen displays a side-by-side mapping between the source and destination volumes. The source system must be connected to display source volume information. Viewing Migration Data Information 43 - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 44
screen provides following information for both the source and destination systems. Group General Field Name ID Domain Set Type Provisioning WWN the volume set to which the volume belongs. The type of volume (base, physical copy, or virtual copy). Indicates whether the selected volume is fully - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 45
and the access time. The RAID configuration of the volume. The current volume configuration (such as cage). The level of failure tolerance for this volume: , Cage, Port, or Magazine. The set size of the volume. The step size of the volume. The type of provisioning of the volume. The - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 46
or iSCSI name. The size of the VLUN in GiB. Hosts Screen The Hosts screen provides the following information for both the source and destination systems. Column Name System Node ID(s) Persona Volumes Exported Total Exported Size Description The name of the host. The name of the - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 47
volume's name. Model The model number of the storage system. Serial Number The serial number of the storage system. OS Version The operating system version in use by the system. SNMP Configuration Indicates whether the system is configured with SNMP. NTP Server Configuration Displays the - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 48
use. The total number of paths on the system and the number of unassigned paths. The number of CPGs on the system. The number of virtual volumes on the system. The number of base volumes on the system. The number of thinly provisioned volumes on the system. The number of fully provisioned volumes on - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 49
: Column Position Label WWN/MAC State Type Connected Device Type Connected Device Description The port location in Node:Slot:Port format. The port label. (Displayed only on destination systems.) WWN or MAC address of the connected device. The state of the port. Indicates whether the port - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 50
that the system automatically selects the rate. Max Rate Maximum rate of connection from the port. Class 2 Indicates whether Fibre Channel service Class 2 set to Disabled, no notification is sent. Unique Node WWN Indicates whether the node's WWN is Enabled or Disabled. Interrupt Coalesce If - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 51
is 1500. When supported by the network, an Storage Name Service (iSNS) server IP address. iSNS protocol allows for automated discovery, management, and configuration of iSCSI. The port on the iSNS server with which to communicate. Viewing Available Storage Systems The Available Storage tree node - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 52
peer capable ports on the system. The number of peer ports on the system. The number of host ports on the system. The number of hosts on the system. The number of host sets on the system. The number of CPGs on the system. The number of virtual volumes on the system. The number of virtual volume - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 53
and start the Remote Copy groups on the destination system from a specially created snapshot that represents the end step of the data migration. For more information, see the HP 3PAR Remote Copy Software User's Guide and the HP 3PAR OS CLI Administrator's Manual. System Post-Migration Tasks 53 - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 54
5 Troubleshooting HP 3PAR-to-3PAR Data Migration If issues arise, you can access the event log through the HP 3PAR Management Console Event Manager. Additionally, the Management Console has a log file directory on the client system. This directory is located at C:\Users\\InFormMC\log. Very - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 55
of support you are requesting: HP 3PAR storage system HP 3PAR StoreServ 7200, 7400, and 7450 Storage systems HP 3PAR StoreServ 10000 Storage systems HP 3PAR T-Class storage systems HP 3PAR F-Class storage systems Support request StoreServ 7000 Storage 3PAR or 3PAR Storage HP 3PAR documentation - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 56
and manage HP 3PAR Remote Copy HP 3PAR Remote Copy Software User's Guide Updating HP 3PAR operating systems HP 3PAR Upgrade Pre-Planning Guide Identifying storage system components, troubleshooting information, and detailed alert information HP 3PAR F-Class, T-Class, and StoreServ 10000 Storage - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 57
3PAR StoreServ 7000 Storage Service Guide HP 3PAR StoreServ 7450 Storage Service Guide Troubleshooting 7200, 7400, and 7450 storage systems HP 3PAR StoreServ 7000 Storage Troubleshooting Guide HP 3PAR StoreServ 7450 Storage Troubleshooting Guide Maintaining the Service Processor HP 3PAR Service - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 58
in order to achieve a functional and supported implementation based on testing at HP. HP 3PAR branding information • The server previously referred to as the "InServ" is now referred to as the "HP 3PAR StoreServ Storage system." • The operating system previously referred to as the "InForm OS - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 59
7 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 60
with Remote Copy as described throughout this guide. This section provides instructions for migrating secondary periodic Remote Copy volumes with the HP 3PAR Command Line Interface (CLI). The HP 3PAR Management Console (MC) does not support these procedures. For more information about Remote - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 61
IP|FC # creatercopygroup :periodic # admitrcopyvv : 9. On the secondary system, start the new Remote Copy group and verify the status. Issue the following commands: # startrcopygroup - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 62
node1, by using the vgdisplay command on all cluster nodes. The Status should show that the volume group is available on a single node only. 6. On node1, change the activation mode to exclusive by issuing the following command: # vgchange -a e -x vg_shared 62 Additional Steps to Migrate HP-UX Hosts - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 63
-s vg_shared 9. Change the activation mode back to shared on all the cluster nodes: a. Change the mode back to shared on node1 by issuing the following copy of this documentation, see the HP Business Support Center (BSC) website: http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 64
3. For each node in the cluster configuration file, modify the values of FIRST_CLUSTER_LOCK_PV and SECOND_CLUSTER_LOCK_PV. Seventeenth Edition. To obtain a copy of this documentation, see the HP BSC website: http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us 64 Additional Steps - HP 3PAR StoreServ 7400 2-node | HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 65
Index C constraints pre-migration, 10 conventions text symbols, 58 Copy Storage Settings and Configurations wizard, 16 D documentation providing feedback on, 59 H HP 3PAR Peer Motion Manager, 11 HP-UX standalone hosts migrating, 62 I Import Volumes wizard, 21 L LUN paths scanning for, 62 M Migrate
HP 3PAR-to-3PAR Storage Peer Motion
Guide
HP Part Number: QL226-97008
Published: June 2013