HP 3PAR StoreServ 7400 2-node HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3. - Page 31
Viewing Port Information, the ports connectivity.
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Viewing Port Information To view the Ports screen: 1. Select Peer Motion in the Manager Pane. 2. Select Ports under Peer Motion Configuration in the Peer Motion tree. The Ports screen shows the topology between the source and destination system ports, a list pane, and a detail pane. The port topology area displays the source and destination systems, the host and peer ports, and the ports connectivity. The list pane provides the following information: Column Position Label WWN/MAC State Type Connection Mode Connected Device Type Connected Device Mode Partner Partner WWN Failover State Description The port location in Node:Slot:Port format. Indicates whether the port is a peer port. The WWN or MAC address of the connected device. The state of the port. Indicates whether the port is FC, iSCSI, RCIP, or RCFC. Indicates whether the connection mode is Host or Peer. Indicates whether the connection device type is Host or Peer. Name of device that the port is connected to. Port firmware mode setting-Initiator, Target, Peer, or Suspended. Ports in Initiator mode are connected to drive cages and ports in Target mode export to hosts. Suspended mode is for target ports that have not yet been initialized by the system (this is rare). Peer mode is for Ethernet ports. The partner port. The WWN of the partner port. Indicates if the system is in a failover state. The detail pane contains a Summary tab. If the connected device type is Host, there is also a Hosts tab. Viewing Port Information 31