HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Administrator& - Page 146
Removing an Adaptive Optimization Configuration
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
In the following example, a CPG is removed from a tier, assuming that three tiers were initially created. If there are two tiers, this command is not permitted, because AO configurations require a minimum of two storage tiers. CLI% cli% setaocfg -t0cpg "" aocfg1 Removing an Adaptive Optimization Configuration To remove an AO configuration from the system, use the removeaocfg command: cli% removeaocfg [options] where: • -pat indicates that specified patterns are treated as glob-style patterns and that all AO configurations matching the specified pattern are removed. By default, confirmation is required to proceed with the command unless the -f option is specified. This option must be used if the pattern specifier is used. This specifier can be repeated to remove multiple AO configurations. If this specifier is not used, the specifier must be used. • -f specifies that the command is forced. If this option is not used, the command requires confirmation before proceeding with its operation. • specifies the name of the AO configuration that is to be removed. In the following example, AO configurations that start with test are removed without requiring user confirmation to remove them: cli% removeaocfg -f -pat test* NOTE: A CPG that is part of an AO configuration cannot be removed from the system until either the AO configuration is removed or the CPG is removed from the aocfg. 146 Adaptive Optimization