HP 3PAR StoreServ 7400 4-node HP 3PAR Service Processor Onsite Customer Care ( - Page 16
Setup, System Support Information, Configuring a Mailhost, Enabling/Disabling Local Notification
View all HP 3PAR StoreServ 7400 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
6 Setup Overview The Setup module provides access to utilities that are used to configure applications within the SPOCC interface. System Support Information By clicking the System Support Information link a user can display and update contact information. Click Next to view additional screens or click Back to return to the previous screen. Click Save to save any changes or click Cancel to return to the Setup page. The contact information is used by HP to provide support for the disk array. The contact information must be provided at the time the disk array is initially configured, however, the information can be updated using these screens if any of the contact information needs to be updated in the future. Configuring a Mailhost 1. In the left navigation pane, click Setup. 2. Under Notification Maintenance Utilities, click the Configure Mailhost link. 3. The form indicates whether a mailhost is already configured. If a mailhost is already configured, update or remove the current configuration as required. If a mailhost is not already configured, add the mailhost configuration: a. Enter the IP Address of the mailhost where this SP is to relay email. b. Enter the Domain Name of the mailhost. NOTE: The domain name is not the fully qualified name of the mailhost (such as mailhost.3par.com or mailhost.west.3par.com) but rather the associated domain name (such as 3par.com or west.3par.com). c. Configure the optional fields as needed: • From ID Override-Override any application-specific "From Ids", and make this the default "From Id" on all mail from this SP. • Additional Send-To Addresses-Add any additional email addresses required on all mail sent from this SP. This is a comma-delimited setting. 4. Click Add Mailhost or Update Mailhost as appropriate to configure the mailhost. Enabling/Disabling Local Notification By clicking the Enabling/Disabling Local Notification link, an authorized user can toggle the local notification setting between "enabled" and "disabled." NOTE: Enabling local notification provides access to the Advanced Configuration Menu. Advanced Configuration Menu Items on this menu are optional, but they do provide the ability to modify several local notification attributes. • Edit Sites Table 16 Setup